Blank Screen with FRskyLite mod

[Clivew]

Pdf looks good to me Joäo, well done

Clive

[jhsa]

I do apologize I included one of your pictures without asking.. Same goes to Mike's picture.. But is for a good cause..

Now just needs to be wikified before someone else does the same mistake..

Joäo

[Rob Thomson]

I will try do it tomorrow!


Sent from my iPhone using Tapatalk

[GTiDon]

Anyway, glad you got it working properly.. What resistors do you say you removed?

Joäo

I cant remember extactly what I added to get it working originally, they were in heatshrink and I just cut them out now. About 3 in series on the Pin2 and another 5k one on pin3

Just added the 470 Ohm one back now

[jhsa]

ok, thanks..

[N827TM]

Hello All,

I am in the process of doing Rob's Mod for the FRsky Telemetry. I have a slight problem I am trying to figure out. I have the Steven's smartieparts Rev. 2.2. He has removed the GND and 5v from his board rev 2.2. I have already completed the first few step in the conversion and I need help to see where to solder the GND and 5V wires.

Thanks,

Tom

[jhsa]

Please read here..

http://openrcforums.com/wiki/index.php/ ... _Converter

João