Hi everyone,
I recently purchased a FrSky Taranis QX7 ACCESS radio.
I updated the firmware from 2.3.11 (or 2.3.12, I don't remember) to the last version (2.3.14).
Everything was working fine for a couple of weeks.
Recently, a new problem occurred on my radio. I am sure it is a hardware issue (electronic) and I am in contact with my reseller. However, he wants me to downgrade to the original firmware (2.3.11 or 2.3.12) and test again, to see if the problem still occurs.
I am sure the problem will remain (it is some kind of bad electronic contact in the main on/off button), but I would still like to test.
OpenTX Companion does not allow for downloading an older version of OpenTX firmware, so my only chance would be that some can send me the corresponding file.
So, can anybody send me the "opentx-x7access-en.bin" file for 2.3.11 and or 2.3.12 or point to a place where I can donwload those files ?
Thanks a lot.
Older OpenTX firmware
Re: Older OpenTX firmware
Just download the FrSky firmware from their site.
Re: Older OpenTX firmware
unless I am wrong, the only way to download the firmware is through the companion. And the companion (as indicated also in another post somewhere) does only allow for downloading the latest firmware, not on older.
Do you know any page, where I can find direct downloads to older versions ? I didn't find any.
I even tried to uninstall Companion 2.3.14 and install Companion 2.3.11 or 12, but still the same : the Companion only check for the last update.
Thanks for your help.
Do you know any page, where I can find direct downloads to older versions ? I didn't find any.
I even tried to uninstall Companion 2.3.14 and install Companion 2.3.11 or 12, but still the same : the Companion only check for the last update.
Thanks for your help.
Re: Older OpenTX firmware
From here https://www.frsky-rc.com/taranis-q-x7-access/
There is 2.3.9 and 2.3.12 available.
Put that bin file on the sd-card in the firmware folder and flash the radio.
That's it.
KH
There is 2.3.9 and 2.3.12 available.
Put that bin file on the sd-card in the firmware folder and flash the radio.
That's it.
KH