Help with Turnigy9xrpro

[mrtyko]

Hello
I have 4 old Turnigy 9xrpro, I will start to use them again with my panzers.
But they have the old original program from Hobbyking 2014.
Is there a simpel easy way to update them? I am a big noob on this.
I can not find the new update files.
The version I have in my radio is:
ersky9x-r204
V.4-Mike
11.05.2014
I would appreciate the help very much.

Robert

[jhsa]

The latest release of the ErskyTX firmware can be downloaded from www.er9x.com

Then download the file "erskyTx for 9XR-PRO"
Download also the latest version of eepe / eepskye and install it. Use it to backup your radio's eeprom.
Then copy the the firmware you have downloaded it to your SD card and place it inside a folder called "firmware".
Start the radio in bootloader mode (By holding both horizontal trims inwards at power on) and flash the firmware.
Start the radio in maintenance mode (By holding both horizontal trims outwards at power on) and update the bootloader.

You will need to download another voice pack, as the newest versions of the firmware use file names instead of numbered files for the voice files.
Get it from here:
https://openrcforums.com/forum/viewtopic.php?f=7&t=7715

Below all my posts you find some links. One of them takes you to some videos I have made explaining how to use Er9x/ErskyTX. I believe one or more videos also explain how to update your radio. Check them out.

João

[mrtyko]

Thanks jhsa I will try this.
Appreciate your help and that you took the time to help me.

Robert

[mrtyko]

Sorry that I am a big NOOB.
But with file is the right release of the ERSKYTX firmware on this homepage? www.er9x.com

Robert

[mrtyko]

Thanks again. I did it.

Robert

[jhsa]

Sorry, I have been busy and didn't see your posts till now. But glad you managed it.
WELL DONE.