Search found 61 matches
- Wed Mar 04, 2015 3:18 am
- Forum: openTx model setup
- Topic: Throttle curve for Multirotor
- Replies: 1
- Views: 5263
Throttle curve for Multirotor
Can anyone help me, I am trying to setup a throttle curve for a Mini quad, atm after setting the endpoints calibrating the esc's and in a Naze32 my hover is at 10% i am running cleanflight and also running the latest firmware in my Taranis i want to make that throttle hover somewhere more like 50% a...
- Mon Feb 24, 2014 10:13 am
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: KK 2.1 setup on er9x
- Replies: 1
- Views: 3883
Re: KK 2.1 setup on er9x
For the self level on a KK 2.1
Set Source = FULL, weight = -125, Switch = GEA then Exit - sets self level on
Set Source = FULL, weight = 0, Switch = !GEA then Exit - sets self level off
and i also got the rates thing too , found then after a few hours of looking lol
Set Source = FULL, weight = -125, Switch = GEA then Exit - sets self level on
Set Source = FULL, weight = 0, Switch = !GEA then Exit - sets self level off
and i also got the rates thing too , found then after a few hours of looking lol
- Mon Feb 24, 2014 6:46 am
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: KK 2.1 setup on er9x
- Replies: 1
- Views: 3883
KK 2.1 setup on er9x
Greetings, I am trying to setup a KK2.1 board and i have all the channels setup and working how i want, I am just trying to setup a self level switch ( on by default and off when i flick it ) if this is possible I'm new to multirotor flying any help would be fantastic Im also looking to use the 3 po...
- Wed Aug 22, 2012 9:35 am
- Forum: er9x
- Topic: Er9x and RC Simulators
- Replies: 27
- Views: 18197
Re: Er9x and RC Simulators
I have done 6 and 8 and in Phoenix they work for me with the Phoenix Hobbyking adapter
- Tue Aug 21, 2012 10:33 am
- Forum: er9x
- Topic: Er9x and RC Simulators
- Replies: 27
- Views: 18197
Re: Er9x and RC Simulators
What version of Er9X are you using and since you have the resistor mod in you don't need to enable trainer mode
also what simulator are you trying to use?
also what simulator are you trying to use?
- Wed Aug 08, 2012 10:56 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Buddy codes for Hobbyking
- Replies: 24
- Views: 17914
Re: Buddy codes for Hobbyking
Nope i work in the yards at a meat works herding Calf's to there deaths so Russia can have Veil
- Wed Aug 08, 2012 6:11 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Buddy codes for Hobbyking
- Replies: 24
- Views: 17914
Re: Buddy codes for Hobbyking
and more Frsky ones to come, I get $200nz a week to spend on the hobby ATM Muwahahaha i love my new Job
- Tue Aug 07, 2012 3:18 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: Buddy codes for Hobbyking
- Replies: 24
- Views: 17914
Re: Buddy codes for Hobbyking
FrSky FVAS-01 Telemetry Variometer Sensor http://rcsearch.info/hobbyking/thumbnails/19975.jpg $9.14 $7.83* (buddy<br>price 14%, -$1.31) FrSky Lipo Voltage Sensor FLVS-01 http://rcsearch.info/hobbyking/thumbnails/22693(1).jpg $10.92 $9.51* (buddy<br>price 13%, -$1.41) FrSky D8R-XP 2.4Ghz Receiver (w...
- Tue Jul 24, 2012 9:24 am
- Forum: Electronic Mods
- Topic: New Wiki page for full hardware mod
- Replies: 15
- Views: 11269
Re: New Wiki page for full hardware mod
You dont even need the trainer Mod for that anymore, I just took my stock module out and placed a frsky one in, but i just used the firmware for it , it does work 100% with the stock module inside have been using the stock module with the firmware and no mod done on a simulator for a few months , wo...
- Thu Jul 19, 2012 9:39 am
- Forum: PROGRAMMERS
- Topic: Ethernet Cable for Data Link
- Replies: 6
- Views: 6520
Re: Ethernet Cable for Data Link
Or even a hard drive 40 pin cable, IDE the old style they are good
- Thu Jul 19, 2012 8:43 am
- Forum: PROGRAMMERS
- Topic: Ethernet Cable for Data Link
- Replies: 6
- Views: 6520
Re: Ethernet Cable for Data Link
i have that inside mine Westy did the mod, The cable is very stiff and tends to come away from the solder very easily, my advise is don't use it, get some softer cable from an electronics store and save yourself some re soldering time
- Mon Jul 16, 2012 5:14 pm
- Forum: Hardware Mods
- Topic: Ultrafire in the transmitter
- Replies: 30
- Views: 20956
Re: Ultrafire in the transmitter
I ordered my 9x from HobbyKing and 10 days ago and I'm anxiously waiting for its arrival. I noticed several youtube videos of people using 3s lipos in their 9x radios. From what I could tell that 8 alkaline cells would reach 12vdc respectively. From my experiences in electronics most things can tol...
- Mon Jul 16, 2012 3:13 am
- Forum: Hardware
- Topic: 9x Cant Get Elevator Working
- Replies: 17
- Views: 9939
Re: 9x Cant Get Elevator Working
http://crashtesthobby.com/instructions/ ... lying-wing
use this link if its for stock, helped me with my wing before i discovered ER9X
use this link if its for stock, helped me with my wing before i discovered ER9X
- Thu Jul 12, 2012 5:07 am
- Forum: RF MODULES
- Topic: Module or MOD for turnigy 9x
- Replies: 10
- Views: 13300
Re: Module or MOD for turnigy 9x
I just did the same thing your asking, I brought the telemetry DIY module that you have to solder into the transmitter with the external screen and a receiver I choose this way so my transmitter will still look the same after changing to Frsky and not have a second antenna poking from it out the bac...
- Sat Jul 07, 2012 8:28 pm
- Forum: Hardware
- Topic: Loading Templates ?
- Replies: 5
- Views: 4233
Re: Loading Templates ?
yes you can there is a 2 little buttons up the top in EEPE that look like computer chips that say when you hover your mouse over them " Read Memory from TX" and " Write Memory from TX" they will let you save what you have on there and write a new one too there Yeah its the easy w...
- Sat Jul 07, 2012 11:42 am
- Forum: The Pickled Gnu (The Pub)
- Topic: trainer question
- Replies: 4
- Views: 4355
Re: trainer question
Also as i am going over on Thursday to do this, is there anything i have to set up on the trainer switch to have it work? or will it automatically work on my transmitter as the master ?
- Thu Jul 05, 2012 11:37 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Vacation in France
- Replies: 13
- Views: 8596
Re: Vacation in France
If you with to learn more about wine making in France, watch the Simpsons episode where Bart goes there as an exchange student and lands in a house that makes wine, that's how i learned
Wine Making in France
Wine Making in France
- Wed Jul 04, 2012 8:39 am
- Forum: The Pickled Gnu (The Pub)
- Topic: Vacation in France
- Replies: 13
- Views: 8596
Re: Vacation in France
Yes you must fly while eating frogs legs and snails and drinking lots of red wine, and say we we a lot also invest in a fake mustache ( if you don't already have one) that's OK In New Zealand atm you have to fly with giant hairy Hobbit like feet ....... Not fun
- Mon Jul 02, 2012 9:50 pm
- Forum: The Pickled Gnu (The Pub)
- Topic: Buddy codes for Hobbyking
- Replies: 24
- Views: 17914
Re: Buddy codes for Hobbyking
valid until 17th July Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack http://rcsearch.info/hobbyking/thumbnails/N2200-3S-25(1).jpg Normally $17.99 (buddy price Saving 43%, -$7.72) $10.27 FrSKY D6FR ACCST 6 Channel RX http://rcsearch.info/hobbyking/thumbnails/D6FR.jpg Normally $19.99 (buddy price Savin...
- Thu Jun 21, 2012 8:58 am
- Forum: The Pickled Gnu (The Pub)
- Topic: trainer question
- Replies: 4
- Views: 4355
Re: trainer question
sorry yes its er9x latest version, and sweet thanks for that information good to know
- Thu Jun 21, 2012 7:47 am
- Forum: The Pickled Gnu (The Pub)
- Topic: trainer question
- Replies: 4
- Views: 4355
trainer question
Can someone with a 9x mode 2 be a slave tx with a 9x mode 1 tx? I have a friend who fly's mode 2 heli's and want to give him a go on a plane but I'm Mode 1 and he is Mode 2
- Tue Jun 19, 2012 12:17 am
- Forum: er9x
- Topic: er9x and simulator
- Replies: 76
- Views: 49153
Re: er9x and simulator
Using Westy's awesome template i managed to get a 7th channel working ( only tested it in his plane sim atm will test in heli soon ) in the 7th channel just add 100% Half Rud :) looking for more, need that 8th channel , I suspect its going to be a pot though :) now the useable switches should be rud...
- Fri Jun 15, 2012 12:05 pm
- Forum: er9x / gruvin9x / th9 based firmwares
- Topic: expo?
- Replies: 1
- Views: 2908
Re: expo?
i just had this issue myself, yes this is what it should look like
- Fri Jun 08, 2012 12:54 am
- Forum: er9x
- Topic: FMS error message - D3DRM.dll is not loaded
- Replies: 1
- Views: 10725
Re: FMS error message - D3DRM.dll is not loaded
this is just an Old Direct X file, FMS likes this to be able to open nothing serious, just go here http://www.dlldump.com/download-dll-fil ... nload.html download that and place it into your FMS install folder, and then it should work
- Wed Jun 06, 2012 7:57 pm
- Forum: er9x
- Topic: Student trainer mode
- Replies: 67
- Views: 39495
Re: Student trainer mode
Hobbyking also sell these
http://www.hobbyking.com/hobbyking/stor ... duct=20002
http://www.hobbyking.com/hobbyking/stor ... duct=20002
- Wed Jun 06, 2012 3:33 am
- Forum: eePe
- Topic: Feature id Like to see
- Replies: 4
- Views: 5010
Feature id Like to see
I would like to see an eepe file that has unlimited Model spaces on it for computer use only that i can store my Modules / template files on so I can collect all these wonderful templates that people are posting and keep them in one file and not have to search through to find the one i had open days...
- Tue Jun 05, 2012 11:21 am
- Forum: Where to buy / Spares / Modules? Selling up?
- Topic: TGY9X soon to be available without RF module/RX
- Replies: 35
- Views: 21672
Re: TGY9X soon to be available without RF module/RX
Id still buy the full priced one, plus if anyone wants to send me there turnigy receivers, Ill gladly take them
- Mon Jun 04, 2012 11:57 am
- Forum: er9x
- Topic: Audio (voice) - Stock 9X PCB
- Replies: 4092
- Views: 1631193
Re: Audio (voice)
and all must be said by a very hot sounding female voice to make everyone at the clubs jealous of the transmitter
- Sun Jun 03, 2012 12:26 pm
- Forum: Hardware
- Topic: How do i set-up expo correctly?
- Replies: 4
- Views: 4638
Re: How do i set-up expo correctly?
awesome thanks, ill take a look at the graph on the spectrum ( if they have one) tomorrow and try and match it on my ( in my opinion better and more awesome) transmitter the guys I'm flying with at the club have never seen a 9x before me and seam impressed with it, especially how configurable it is ...
- Sun Jun 03, 2012 9:40 am
- Forum: Hardware
- Topic: How do i set-up expo correctly?
- Replies: 4
- Views: 4638
Re: How do i set-up expo correctly?
Thanks, Now or an answer on the Expo. lol Hope im doing it right