When working on the 9x, a good magnifying glass is a huge bonus.
I recently purchased on of these:
http://www.maplin.co.uk/22w-fluorescent ... lamp-47980
Actually got mine cheaper on ebay - but it is the same product.
These are superb and well worth it if you are looking working on your 9x or other general electronic jobs.
Working with small components - you need a magnifying glass!
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Working with small components - you need a magnifying glass!
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 49
- Joined: Tue Dec 27, 2011 5:59 pm
- Country: -
Re: Working with small components - you need a magnifying gl
I bought these for $12us at a local shop that magnify from 2x to 10x and love em.
Re: Working with small components - you need a magnifying gl
Hi
As well as the head sets I use the small monoculars that slip over glasses I also use the small forceps pliers both straight and angled that are used in a operating theatre.. as well as those air sucker pens (you blow out the air put the rubber against what you need to pick up and let the air back in they are great for smd bits)
Andy
As well as the head sets I use the small monoculars that slip over glasses I also use the small forceps pliers both straight and angled that are used in a operating theatre.. as well as those air sucker pens (you blow out the air put the rubber against what you need to pick up and let the air back in they are great for smd bits)
Andy
Re: Working with small components - you need a magnifying gl
If you can get your hands on one of these:
That is 1,000,000 times better. The level of accuracy you can reach is stupendus.
That is 1,000,000 times better. The level of accuracy you can reach is stupendus.
Z
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
Re: Working with small components - you need a magnifying gl
I use mine to help me read Playboy.
Dang, but you ultimately have to match the vision magnification to the same level of how your hand shakes. Both degrade at about the same rate.
Ted
Dang, but you ultimately have to match the vision magnification to the same level of how your hand shakes. Both degrade at about the same rate.
Ted
- Crashj007
- Posts: 133
- Joined: Tue Jan 31, 2012 11:44 pm
- Country: -
- Location: Raleigh, NC, USA
- Contact:
Re: Working with small components - you need a magnifying gl
Ted, Playboy makes your hands shake?
--
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
Re: Working with small components - you need a magnifying gl
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Working with small components - you need a magnifying gl
Nnnooottt ttthhhaaattt III nnnoootttiiiccceee.
Ted
Ted
Re: Working with small components - you need a magnifying gl
LOL. Now that was funny.