I pulled the 3v pad off the left side of the board and can no longer see any text on my screen. For a while, it worked ok but has since stopped working and cannot be seen. I am looking to get a main board. I was hoping I could work out a mod for the er9x board but cannot see it fitting/working in the case.
I'm located in the U.S.
looking for a 9x main board
- MikeB
- 9x Developer
- Posts: 18054
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: looking for a 9x main board
Post a picture of the damage. We might be able to suggest a repair.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
-
- Posts: 18
- Joined: Sun Jul 15, 2012 6:17 pm
- Country: -
Re: looking for a 9x main board
I'm out in Michigan
the pad that was removed was this one:
Re: looking for a 9x main board
All you should need is to replace the broken track with a wire.
Re: looking for a 9x main board
If you are not capable of this fine soldering, I live near Holly Mi and can repair this for you.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
looking for a 9x main board
I'm wondering what you were doing to pull the pad off.
Having someone close offering to help it the best option if your not up to fixing it. Give him a try.
I live in LA and could do it also. I actually have a spare board but it's modified for telemetry and haptic and USBasp programming already.
Sent from my iPod touch using Tapatalk
Having someone close offering to help it the best option if your not up to fixing it. Give him a try.
I live in LA and could do it also. I actually have a spare board but it's modified for telemetry and haptic and USBasp programming already.
Sent from my iPod touch using Tapatalk