Hi, I got a Taranis X7 from Banggood (China) so I flashed the firmware to the latest EU-LBT and a X4R-SB from the UK so already should be EU-LBT but still I flashed it just to be sure. Still they won't bind, I've tried a lot of different ways but no luck. Something that I read around is that in order to confirm if you have a EU or FCC firmware is to check the available modes (D8, D16, LR12) and they say if it is EU you won't be able to select D8 or LR12 but I can! And I've flashed the int. device with the latest EU-LBT using OpenTx 2.2.0.
I've tried to flash both to non-EU but some say the newer EU X4R can't be downgraded/flashed. I tried anyway and got no errors so I guess I did flash it but then again, so shouldn't I be getting the option to select D8 or LR12 modes on the transmitter but still I do... I've been "flashing" with latest OpenTx so maybe it's broken for me and it isn't really flashing? It's just a thought. The only one that is making sense to me right now.
ps: I've tried binding a few feet apart, Sbus disconnected, fresh transmitter battery, all the basics you see thrown around the forums.
Best Regards,
CubriC
Taranis Q X7 will not bind
Re: Taranis Q X7 will not bind
This is incorrect, OpenTX canot know what firmware is on the module. If you flashed OpenTX without the "eu" option ticked you'll always have the choices displayed.
Re: Taranis Q X7 will not bind
Yes, you are right, I just confirmed that a few hours ago ticking some options on the Companion. Thank you.
Still I can't bind these 2, so weird. They are supposed to bind right out of the box!
UPDATE #1:
I just noticed that both LED's being solid ON isn't covered on the official FrSky's Manual. Binding mode is solid Green and flashing Red but I get both being solid and they stay that way. I saw on other forums 1 or 2 threads of people this issue and they changed the Channel Range and they got their receiver to get the solid Green and flashing Red (Binding mode). I'm trying to contact FrSky Technical Support but no luck, I tried on Facebook Messenger and they said to email them... This is starting to get fustrating now.
Re: Taranis Q X7 will not bind
Do you have more than one receiver? First thing to try is another one, could be defective.
Re: Taranis Q X7 will not bind
I don't, I'm just getting started with this hobby. I'm looking around this side of the country (North of Portugal) for people that might have a similar X series receiver or something. So far no luck.
Re: Taranis Q X7 will not bind
I have the same problem.
I have tried with the following receivers: XSR, XM+, another XM+ and an XM.
I have tried all firmwares, both LBT and FCC (EU and Non-EU) with older versions of the firmwares as well. Nothing will bind, and I get the solid green and solid red LEDs. I am powering the receivers through and bench power supply at 5v.
I have had it bind to the XM in the past, using the Non-EU firmware, however now nothing seems to bind.
I have tried with the following receivers: XSR, XM+, another XM+ and an XM.
I have tried all firmwares, both LBT and FCC (EU and Non-EU) with older versions of the firmwares as well. Nothing will bind, and I get the solid green and solid red LEDs. I am powering the receivers through and bench power supply at 5v.
I have had it bind to the XM in the past, using the Non-EU firmware, however now nothing seems to bind.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Taranis Q X7 will not bind
Have you flashed the internal module to the right version for your receivers?
Sent from my Z Pro using Tapatalk
Sent from my Z Pro using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Taranis Q X7 will not bind
Any resolution on this??? I'm having the exact same issue with an x8r and Q X7S
Re: Taranis Q X7 will not bind
Had the same problem. Had updated the RX and TX to LBT firmware. Tried multiple times with no joy. Till I found that the XJT needed to be updated too. Here is the link https://www.frsky-rc.com/xjt/ All good now