Hi Everyone,
I am in need of a wiring diagram or maybe a repair man to help me fix my 9XR. I purchased a 9XR used " almost new "
I should have known. When I recieved the radio I found it had a broken gimbal pot. So I set the parts aside and ordered a new gimbal assmbly. When the gimbal arrived I replaced it and realized My mistake, getting old is no Fun ,
I forgtot to mark which plug goes where. I thought it would just be just reversed. I was wrong and I think I have now blown the main board. So at this point I am in need of a wiring diagram and a main board. Can anyone help out an old man with a diagram?
Thank You for any help
Have a nice day
Sincerely
Cabie
My email is ( [email protected] )
9XR Repair or Schematic
- MikeB
- 9x Developer
- Posts: 18004
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR Repair or Schematic
Worth removing your e-mail address from your post.
Let's go right back. Did the Tx power up OK when you first had it?
After you changed out the Gimbal, what then happened?
If you unplug the connectors with the wires from the gimbals in and power up, what happens?
Mike.
Let's go right back. Did the Tx power up OK when you first had it?
After you changed out the Gimbal, what then happened?
If you unplug the connectors with the wires from the gimbals in and power up, what happens?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!