Work on graphics and screens ...
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Work on graphics and screens ...
A new one today. Idea from Kilrah ...
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Work on graphics and screens ...
Nice!
Sent from my GT-I9300 using Tapatalk 2
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Work on graphics and screens ...
Hy Bertrand,
whats a good LCD Grafik desinger for splash and other logos ?
what dimensions for Taranis splash and logo to use
and what file name jpg bmp png ?
Is there splash collection for Taranis format?
Helle
whats a good LCD Grafik desinger for splash and other logos ?
what dimensions for Taranis splash and logo to use
and what file name jpg bmp png ?
Is there splash collection for Taranis format?
Helle
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
I use gimp. LCD size is 212x64. 4bits depth (16 grayscales, but the tones are not linear at all, so you will really need to test on the Tx)
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Work on graphics and screens ...
I understand this is the size for flash screen.. correct? What size for the model representation graphic?bertrand35 wrote:I use gimp. LCD size is 212x64. 4bits depth (16 grayscales, but the tones are not linear at all, so you will really need to test on the Tx)
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
For the planes icons, it's 64x32. And the format must be BMP either 1bit (black and white) or 4bits (grayscales).
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
The new curves menus ... designed by Martin (thanks!)
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
I received some comments / suggestions. Here are the new screens...
- You see which preset you are using... - New entries in the menu for Mirror and Clear! - In the curves list, you see the points over the curve
- You see which preset you are using... - New entries in the menu for Mirror and Clear! - In the curves list, you see the points over the curve
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
A couple of screens designed by Martin ...
Bertrand.
Bertrand.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Work on graphics and screens ...
Nice.
Not sure mine should be the only name
Sent from my GT-I9300 using Tapatalk 2
Not sure mine should be the only name
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
But I cannot show the one of Mike, I need a bigger screen
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Work on graphics and screens ...
"Your donation will ensure that it remains free and open".
First of all I totally understand the intent -- but let me play devils advocate for just a minute. This can be read several ways.
1. I've donated therefore we have a contract that it will remain free and open. (not intended)
- OR -
2. It's a veiled threat - "If we don't get enough donations then we're going to retract the free and open status". (not intended, and negative)
- OR -
3. Dude -- we put our blood sweat and tears into this code. How about chipping in enough to buy a round of drinks. (pretty much on target)
Let's just say -- IF nobody donates (for the sake of argument) -- is the status of "free and open" REALLY going to change? Are you doing this so you'll receive recompense?? If so, you're already on your way out the door. If not, then the wording is not appropriate.
I'm not opposed to a "supported by your donations". sort of line... but the if-then part I find a bit worrisome.
OR -- "Donate to this software and we'll include your name in the credits". Now there is an incentive.
Not trying to stir the s*** pot. Just looking through a different pair of glasses.
I love all ya coders -- and not in the creepy way.
First of all I totally understand the intent -- but let me play devils advocate for just a minute. This can be read several ways.
1. I've donated therefore we have a contract that it will remain free and open. (not intended)
- OR -
2. It's a veiled threat - "If we don't get enough donations then we're going to retract the free and open status". (not intended, and negative)
- OR -
3. Dude -- we put our blood sweat and tears into this code. How about chipping in enough to buy a round of drinks. (pretty much on target)
Let's just say -- IF nobody donates (for the sake of argument) -- is the status of "free and open" REALLY going to change? Are you doing this so you'll receive recompense?? If so, you're already on your way out the door. If not, then the wording is not appropriate.
I'm not opposed to a "supported by your donations". sort of line... but the if-then part I find a bit worrisome.
OR -- "Donate to this software and we'll include your name in the credits". Now there is an incentive.
Not trying to stir the s*** pot. Just looking through a different pair of glasses.
I love all ya coders -- and not in the creepy way.
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
Well, I am not native english, I mainly use it for work / technical stuff. I found the formula in another open source, and compressed it a little bit so that it fits in this screen! Feel free to propose something better (that fits!) and I will change.
1. and 2. are wrong
3. (Dude...) is exactly what I have in mind
1. and 2. are wrong
3. (Dude...) is exactly what I have in mind
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
I still think that the idea of the 1st phrase must remain. I received some emails from people that thought we were paid by FrSky for the port, which is NOT the case.
We have done everything for free, just because we enjoyed it (working together with Mike/Romolo/André was for me a pleasure), and we have done it the best way we can, because we will fly with this Tx!
Bertrand.
We have done everything for free, just because we enjoyed it (working together with Mike/Romolo/André was for me a pleasure), and we have done it the best way we can, because we will fly with this Tx!
Bertrand.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Work on graphics and screens ...
I can see both points.
Any one got a suggestion of some subtley different wording that getsnthebmesaage across - with out being misconstrued?
Sent from my GT-I9300 using Tapatalk 2
Any one got a suggestion of some subtley different wording that getsnthebmesaage across - with out being misconstrued?
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Work on graphics and screens ...
Just use a standard opensource disclaimer. Like the one from Debian.
This software is opensource and comes with no warranties. Check gnu.org for details.
It can be distributed for free but donations are welcome. OpenTX is a noncommercial project and not affiliated with FrSky.
This software is opensource and comes with no warranties. Check gnu.org for details.
It can be distributed for free but donations are welcome. OpenTX is a noncommercial project and not affiliated with FrSky.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Work on graphics and screens ...
That sounds fair enough. Bertrand - you call
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Work on graphics and screens ...
I like a line such as "OpenTX developers are not paid. Development is supported by donations of the users". Or just "OpenTX development is supported by donations of users. Your support is appreciated".
It makes no promises, just states the facts.
It makes no promises, just states the facts.
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
Fine with me as well, I will give it a try!
Re: Work on graphics and screens ...
I think this pretty much says everything.. And it's shorttilmanb wrote:Just use a standard opensource disclaimer. Like the one from Debian.
This software is opensource and comes with no warranties. Check gnu.org for details.
It can be distributed for free but donations are welcome. OpenTX is a noncommercial project and not affiliated with FrSky.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Work on graphics and screens ...
+1 from me. Concise and complete.jhsa wrote:I think this pretty much says everything.. And it's shorttilmanb wrote:Just use a standard opensource disclaimer. Like the one from Debian.
This software is opensource and comes with no warranties. Check gnu.org for details.
It can be distributed for free but donations are welcome. OpenTX is a noncommercial project and not affiliated with FrSky.
Ted
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Work on graphics and screens ...
I really hate to be such a pain in the butt and hair splitter -- but I think there is one small tiny change that I think is needed -- for proper meaning it should say "It may be distributed..." rather than "It can be distributed..."
Re: Work on graphics and screens ...
Any better?
- Attachments
-
- snapshot_01.png (3.71 KiB) Viewed 12782 times
Re: Work on graphics and screens ...
Nice.. What about a link to the opentx project and/or donations ??
Not that the tx has internet of course but people would know where to go at least..
Not that the tx has internet of course but people would know where to go at least..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Work on graphics and screens ...
Looks good to me
Sent from my GT-I9300 using Tapatalk 2
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Work on graphics and screens ...
It's quicker to type openTx in google and end straight where you want than to type a complete URL nowadays
Re: Work on graphics and screens ...
true
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Work on graphics and screens ...
HTTP over PXXjhsa wrote:Nice.. What about a link to the opentx project and/or donations ??
Re: Work on graphics and screens ...
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: Work on graphics and screens ...
Thumbs up.Kilrah wrote:Any better?