Where to find er9x
Where to find er9x
Link to the er9x codepage.
http://code.google.com/p/er9x/
Links to the latest firmware files can be downloaded there.
Link to English manual.
http://er9x.googlecode.com/svn/trunk/do ... 0Guide.pdf
http://code.google.com/p/er9x/
Links to the latest firmware files can be downloaded there.
Link to English manual.
http://er9x.googlecode.com/svn/trunk/do ... 0Guide.pdf
Re: Where to find er9x
Extended Hungarian Manual (kibővített Magyar leírás):
http://rc-miskolc.emiter.hu/index.php?o ... Itemid=135
http://rc-miskolc.emiter.hu/index.php?o ... Itemid=135
Last edited by HC1969 on Sun Jan 15, 2012 6:30 pm, edited 1 time in total.
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: Where to find er9x
Is there a german manual available ?
Re: Where to find er9x
Not yet... Want to translate?
The Hungarian manual is also available from the er9x code page.
The Hungarian manual is also available from the er9x code page.
Z
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
Re: Where to find er9x
When starting eePe, it asked if I want to doanload the lastest version, R766 (7-17-2012), should I be loading R766 or the stable version R708?
Is there a list of enhancments/bug fixes for each revision?
Thanks in advance!
Ozzy
Is there a list of enhancments/bug fixes for each revision?
Thanks in advance!
Ozzy
Re: Where to find er9x
Hello this is my first post I'm going to flash my 9x in the morning I hope all goes well
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Where to find er9x
What program will you use,what OS, what version er9x or open9x?quadpower wrote:Hello this is my first post I'm going to flash my 9x in the morning I hope all goes well
What programmer?
Make sure your drivers are loaded and good luck.
SM
ShowMaster
Sent from my iPod touch using Tapatalk
Re: Where to find er9x
I using windows and the er9x version any advise would be much appreciated and I am using the smarty parts. Thanks
Re: Where to find er9x
Download eepe from here,
http://code.google.com/p/eepe/
Install it and configure it for the er9x version you have. (er9x, er9x_frsky, etc).
When you reestart eepe, it will download the latest available version of er9x.
NOTE: er9x_frsky is to use only if you did the telemetry mod to the radio, that involves re-routing 2 of the switches to other 2 pins of the CPU. If you haven't done this, please choose the er9x version..
eepe can also flash the fw to the radio but you will have to configure it to your programmer.. I think there are a couple tutorials on the wiki?? not sure though.
João
http://code.google.com/p/eepe/
Install it and configure it for the er9x version you have. (er9x, er9x_frsky, etc).
When you reestart eepe, it will download the latest available version of er9x.
NOTE: er9x_frsky is to use only if you did the telemetry mod to the radio, that involves re-routing 2 of the switches to other 2 pins of the CPU. If you haven't done this, please choose the er9x version..
eepe can also flash the fw to the radio but you will have to configure it to your programmer.. I think there are a couple tutorials on the wiki?? not sure though.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Where to find er9x
Thank you very much I will let you know how it goesjhsa wrote:Download eepe from here,
http://code.google.com/p/eepe/
Install it and configure it for the er9x version you have. (er9x, er9x_frsky, etc).
When you reestart eepe, it will download the latest available version of er9x.
NOTE: er9x_frsky is to use only if you did the telemetry mod to the radio, that involves re-routing 2 of the switches to other 2 pins of the CPU. If you haven't done this, please choose the er9x version..
eepe can also flash the fw to the radio but you will have to configure it to your programmer.. I think there are a couple tutorials on the wiki?? not sure though.
João
Re: Where to find er9x
Before you try to flash your radio, try first to read your eeprom and save it in your computer.. If you can do this step it is normally a sign that all is ok and there will be no problem flashing the radio..
If you have any doubts about the configuration don't hesitate to ask here.
João
If you have any doubts about the configuration don't hesitate to ask here.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Where to find er9x
But so remember... Eepe and companion will read the epprom - but complain. They don't know what format it is - but can download it
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Where to find er9x
I think he already has er9x??quadpower wrote:I using windows and the er9x version any advise would be much appreciated and I am using the smarty parts. Thanks
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Where to find er9x
No, he wants to use er9x, it's just less than perfect English
Re: Where to find er9x
New to forums, noticed there is no stable version listing for ER9X, is it advisable to use the latest version listed, as that is all that is available as far as I can see?
Re: Where to find er9x
Yes, the latest version is considered stable.
Re: Where to find er9x
Thankyou very much for your help Kilrah, its greatly appreciated.
Re: Where to find er9x
I took the plunge on the weekend and flashed er9x to my radio. I used the "Latest Binaries". However it has a version something like v345? (sorry I do not have the tx here with me as I type this). I am wanting to experiment with the sound module addition and I see it requires version V772 or later. I have searched for the "latest version" and all roads lead me back to the page I got the v345 from. Can someone please direct me to where I can see the various versions, especially v772. By the way is v772 considered stable?? Thanks to whoever....
Re: Where to find er9x
Download eePe (link above), then from within the PC app download er9x.
Re: Where to find er9x
I believe your looking for this? http://code.google.com/p/er9x/source/listPhelec wrote:I took the plunge on the weekend and flashed er9x to my radio. I used the "Latest Binaries". However it has a version something like v345? (sorry I do not have the tx here with me as I type this). I am wanting to experiment with the sound module addition and I see it requires version V772 or later. I have searched for the "latest version" and all roads lead me back to the page I got the v345 from. Can someone please direct me to where I can see the various versions, especially v772. By the way is v772 considered stable?? Thanks to whoever....
The latest ver. is r790, which I think is considered stable??
Last edited by Hman545 on Sat May 11, 2013 7:49 am, edited 1 time in total.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Where to find er9x
Mike... do you have access on google code to edit the home page contents?
May be worth updating the link to the above locations?
Sent from my GT-I9300 using Tapatalk 2
May be worth updating the link to the above locations?
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Where to find er9x
I'll see if I can find time. Erazz used to do that, I've not got into the habit of keeping it updated.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 5
- Joined: Thu May 01, 2014 7:36 pm
- Country: -
Re: Where to find er9x
The er9x Code Page:
http://code.google.com/p/er9x/
Has links for 'Latest Binaries' of the different flavors of ER9X, but doesn't display the version/revision/date/time of any of the current releases.
Where do I get that information?
It sure would be convenient (and expected) if the version information were displayed with the link.
Also, on:
http://openrcforums.com/wiki/index.php/ ... nformation
the link:
A detailed list of firmware versions and features/fixes can be found at:
http://code.google.com/p/er9x/updates/list
is dead, and should be updated or removed.
Thanks for your help
http://code.google.com/p/er9x/
Has links for 'Latest Binaries' of the different flavors of ER9X, but doesn't display the version/revision/date/time of any of the current releases.
Where do I get that information?
It sure would be convenient (and expected) if the version information were displayed with the link.
Also, on:
http://openrcforums.com/wiki/index.php/ ... nformation
the link:
A detailed list of firmware versions and features/fixes can be found at:
http://code.google.com/p/er9x/updates/list
is dead, and should be updated or removed.
Thanks for your help
Re: Where to find er9x
Click on the "Source" tabMumblingFumbler wrote:The er9x Code Page:
http://code.google.com/p/er9x/
Has links for 'Latest Binaries' of the different flavors of ER9X, but doesn't display the version/revision/date/time of any of the current releases.
Where do I get that information?
Click on "Changes"
Takes you here:
https://code.google.com/p/er9x/source/list
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Where to find er9x
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Where to find er9x
Where can I fins a recent er9x Users Guide that fits the latest firmware and the new menu format?
I Have:
Vers: V1.2432-Mike
Date: 10.1.2015
Time: 2007.21
SUN: er9x-r816
I am trying to figure out how to set up a channel using the 3 way switch.
Sudsy
I Have:
Vers: V1.2432-Mike
Date: 10.1.2015
Time: 2007.21
SUN: er9x-r816
I am trying to figure out how to set up a channel using the 3 way switch.
Sudsy
Re: Where to find er9x
We are working on it. Give it a week or so. It should be ready.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Where to find er9x
Really easy now.Sudsy wrote:Where can I fins a recent er9x Users Guide that fits the latest firmware and the new menu format?
I Have:
Vers: V1.2432-Mike
Date: 10.1.2015
Time: 2007.21
SUN: er9x-r816
I am trying to figure out how to set up a channel using the 3 way switch.
Sudsy
Set up a mix with Source as sIDx (it's at the end of the list of CH1..Ch16).
Don't set a switch.
It will look like:
CH5 100 sIDx
It will give -100,0,100 (unless you change the weight.
Re: Where to find er9x
I'm sure if r816 already has switches as source?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Where to find er9x
Yes, it does.jhsa wrote:I'm sure if r816 already has switches as source?
João