I have a Horus X12 with OpenTx X12S-2.3.2 firmware (updated Nov. 2019), but it appears that if I read model memories created since then into Open Companion, the inputs are blank down to about channel 17 then some weird entries, whereas models created previously have channels populated as on the Tx.
All models are ok on the Tx.
Companion is version 2.2.ON 363.
Has anyone seen this & know how to correct?
Weird model memory data in Companion
Re: Weird model memory data in Companion
You cannot use companion 2.2 with with fimware 2.3, you need to use companion 2.3.
Also you should not run a Horus on 2.3 firmware lower than 2.3.5.
Also you should not run a Horus on 2.3 firmware lower than 2.3.5.
Re: Weird model memory data in Companion
Many thanks.
Have upgraded to 2.3.7 & that seems to have fixed it.
Have upgraded to 2.3.7 & that seems to have fixed it.