Stock Firmware - For Flashing
Re: Stock Firmware - For Flashing
Just save them directly to file, and it will work fine.
-Gohst
Sent from my LG-P999 using Tapatalk 2
-Gohst
Sent from my LG-P999 using Tapatalk 2
Re: Stock Firmware - For Flashing
Just did it. there is a hex file and a eeprom file now. I guess it is backed up. thx.
Re: Stock Firmware - For Flashing
One way to know for sure. Flash something else to the radio. Then flash the original back. See if it works.
Sent from my LG-P999 using Tapatalk 2
Sent from my LG-P999 using Tapatalk 2
Re: Stock Firmware - For Flashing
Hi! Can someone post the stock Flysky (not the Turnigy) firmware? Someone I'm selling one of my TXes to is requesting it. Thanks.
- MikeB
- 9x Developer
- Posts: 17994
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Stock Firmware - For Flashing
I thought they are the same thing!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Stock Firmware - For Flashing
Mike, I have a flysky radio that hasn't been modded yet. Can I save the fw with eepe? and the eeprom?
If so, I can try and post it in the forum.. will have to solder the wires of course, so it could take a few hours..
João
If so, I can try and post it in the forum.. will have to solder the wires of course, so it could take a few hours..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Stock Firmware - For Flashing
They are the same, only thing changing is the splash screen.
Sent via mobile
Sent via mobile
-
- Posts: 1
- Joined: Mon Oct 06, 2014 11:32 am
- Country: -
Re: Stock Firmware - For Flashing
i am poor in englishi,i want to get at91sam3s8-9xr.zip
- MikeB
- 9x Developer
- Posts: 17994
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Stock Firmware - For Flashing
Try here: viewtopic.php?f=123&t=5581&p=83566&hili ... 3s8#p83548.
You only need this if the bootloader is not working (Hold both horizontal trims to the centre, then switch on).
Mike.
You only need this if the bootloader is not working (Hold both horizontal trims to the centre, then switch on).
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Stock Firmware - For Flashing
hi guys
I looking for firmware version 1.05 Turnigy Tgy i10 but can't find I have updated my transmitter to version 1.07 and also my receivers but only 2 channels on my receiver is working so I want back to version 1.05 how now's a link to find this firmware.
I looking for firmware version 1.05 Turnigy Tgy i10 but can't find I have updated my transmitter to version 1.07 and also my receivers but only 2 channels on my receiver is working so I want back to version 1.05 how now's a link to find this firmware.
Re: Stock Firmware - For Flashing
Hi..i am a new user here. I have few queries.,.,Has any corrections to the original FW been made like spelling?There are some that see no reason to be able to upgrade their FW and loading a cleaned up version could be just the thing to lure them to try reprogramming without going to er9x or other FW.
With some of the recent low cost programming options it could catch on.
assembly pcb
With some of the recent low cost programming options it could catch on.
assembly pcb
Last edited by UrsaFrey on Tue Aug 23, 2016 6:12 pm, edited 1 time in total.
Re: Stock Firmware - For Flashing
No, nothing was ever fixed on the original 9x firmware, neither spelling mistakes nor the more important bugs like reversed trainer operation.
Re: Stock Firmware - For Flashing
Anyone has the original firmware for V2 versions?
- MikeB
- 9x Developer
- Posts: 17994
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Stock Firmware - For Flashing
There is a file on the first post of this thread.
I also have: that I think is the "latest" firmware that supports your module. You need to flash both the firmware and the EEPROM.
Mike
I also have: that I think is the "latest" firmware that supports your module. You need to flash both the firmware and the EEPROM.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Stock Firmware - For Flashing
Thanks for the help.
Re: Stock Firmware - For Flashing
The EEPROM says that can be corrupted. I cannot upload it.
Re: Stock Firmware - For Flashing
You must flash it directly, not try to open it as a document.