9xr-pro and XJT module not working on pxx
9xr-pro and XJT module not working on pxx
Hello,
The XJT and X6R are bound, but I am not getting any servo movement with pxx, if I switch to ppm the servos will move. What's going on?
Sent from my LG-H811 using Tapatalk
The XJT and X6R are bound, but I am not getting any servo movement with pxx, if I switch to ppm the servos will move. What's going on?
Sent from my LG-H811 using Tapatalk
-
- Posts: 10
- Joined: Sun Mar 13, 2016 5:06 pm
- Country: United States
Re: 9xr-pro and XJT module not working on pxx
Sounds like the rx is in d8 or D_ mode
Re: 9xr-pro and XJT module not working on pxx
It's not, I put both switches down and picked D16 in the menu. The RX? I bound it without any jumpers isn't that D16?
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk
-
- Posts: 10
- Joined: Sun Mar 13, 2016 5:06 pm
- Country: United States
Re: 9xr-pro and XJT module not working on pxx
are u binding it while in pxx just curious if it binds with the radio in pxx I am really confused
Re: 9xr-pro and XJT module not working on pxx
Yes it binds in pxx
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk
Re: 9xr-pro and XJT module not working on pxx
Are you binding using the menu option? You must NOT use the button and switches on the module when in PXX mode, only the menu options.
Re: 9xr-pro and XJT module not working on pxx
No, I'm using the button, what position should the switch be in? Both down?
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk
Re: 9xr-pro and XJT module not working on pxx
It doesn't actually matter as long as they're NOT both up as whatever's received on PXX overrides them.
Re: 9xr-pro and XJT module not working on pxx
I'm gonna try that.
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk
Re: 9xr-pro and XJT module not working on pxx
OK, I am getting telemetry but no servo controls. What the heck is going on? I'm in D16 mode, PXX. But! If I switch to PPM I have full control of the plane but no telemetry.
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk
Re: 9xr-pro and XJT module not working on pxx
Please help!
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9xr-pro and XJT module not working on pxx
What firmware are you using, and what revision.
If you are on ersky9x, please flash the latest test version from here: viewtopic.php?f=7&t=4676#p65894 (ersky9xProvR219j.zip). There has been a possible problem with an earlier test version on the 'PRO where the PXX signal wasn't being sent. I still don't know why it wasn't being sent, as the code is the same for the SKY/AR9X boards and they work.
Mike.
If you are on ersky9x, please flash the latest test version from here: viewtopic.php?f=7&t=4676#p65894 (ersky9xProvR219j.zip). There has been a possible problem with an earlier test version on the 'PRO where the PXX signal wasn't being sent. I still don't know why it wasn't being sent, as the code is the same for the SKY/AR9X boards and they work.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9xr-pro and XJT module not working on pxx
I am on one of the test versions, I'll flash the new one when I get home from work and report back! Thanks!MikeB wrote:What firmware are you using, and what revision.
If you are on ersky9x, please flash the latest test version from here: viewtopic.php?f=7&t=4676#p65894 (ersky9xProvR219j.zip). There has been a possible problem with an earlier test version on the 'PRO where the PXX signal wasn't being sent. I still don't know why it wasn't being sent, as the code is the same for the SKY/AR9X boards and they work.
Mike.
Sent from my iPad using Tapatalk
Re: 9xr-pro and XJT module not working on pxx
That worked, thanks Mike!
Sent from my LG-H811 using Tapatalk
Sent from my LG-H811 using Tapatalk