Problem of non steady channels.

tgy9x is a fork of er9x, and is the default firmware that is released by hobbyking on the Turnigy 9XR transmitter.
Post Reply
User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Problem of non steady channels.

Post by Kilrah »

You don't mention what RF module and receiver you're using nor what settings you've changed from the defaults on your model configuration.

Trailfox
Posts: 1
Joined: Fri Apr 24, 2015 1:37 pm
Country: -

Re: Problem of non steady channels.

Post by Trailfox »

I use the standard Mode 2 X9 from Hobbyking. My RF is the 9X V2 and the receiver is the 9x 8c V2. Everything is standard in my model config. I just want the channels reach 2000 instead of 1450 what they reach now. Is there any setting that i missed?
ReSt
Posts: 1581
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: Problem of non steady channels.

Post by ReSt »

Did you calibrate the sticks and pots?

Reinhard
Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Problem of non steady channels.

Post by Daedalus66 »

Is there a calibration option in the stock firmware? I don't see it in the manual.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Problem of non steady channels.

Post by jhsa »

Yes, there is.. I remember doing it once just for the fun (or not ;) ) of it..

http://www.hacksmods.com/2012/08/flysky ... ion-howto/

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “tgy9xr”