Voice files for 9XR-PRO with ersky9x
Voice files for 9XR-PRO with ersky9x
Voice pack for Ersky9x can now be downloaded from here:
viewtopic.php?f=7&t=7715
Older packs were removed because the voices are no longer available and cannot be updated.
João
viewtopic.php?f=7&t=7715
Older packs were removed because the voices are no longer available and cannot be updated.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
hello
and thank you for this forum
have it in french?
ps I'm french!
thank you
and thank you for this forum
have it in french?
ps I'm french!
thank you
Re: Voice files for 9XR-PRO with ersky9x
no, not at the moment..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
Voice files for using with the new test versions from 6th July on. Files now can use names instead of numbers, but we still keep the numbers as well because the transition is still not completely finished. Please notice that there are 3 folders inside the voice folder now. Named files can have a maximum of 8 characters. This is important.
"System" - It's where all the system files will go. these files CANNOT be modified.
"User" - This is where all your non system files will go. Files like "FlapsUp" or "GearUp" will go in this folder.. I have many already there.. All from my other pack.
"modelNames" - I think I don't need to explain this one Just make sure you don't exceed 8 characters on the names.. I left my model names in the folder so you can look at them as examples.. Of course, you must make your own
IMPORTANT: This pack will be always updated as the voice handling continues to be improved by Mike. So, by using this, make sure that you are aware that you might have to update the pack quite often. Not a big deal, right?
I think that is all, questions are welcome. Enjoy
viewtopic.php?f=122&t=5680#p80686
"System" - It's where all the system files will go. these files CANNOT be modified.
"User" - This is where all your non system files will go. Files like "FlapsUp" or "GearUp" will go in this folder.. I have many already there.. All from my other pack.
"modelNames" - I think I don't need to explain this one Just make sure you don't exceed 8 characters on the names.. I left my model names in the folder so you can look at them as examples.. Of course, you must make your own
IMPORTANT: This pack will be always updated as the voice handling continues to be improved by Mike. So, by using this, make sure that you are aware that you might have to update the pack quite often. Not a big deal, right?
I think that is all, questions are welcome. Enjoy
viewtopic.php?f=122&t=5680#p80686
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
Hi frenchy13.
You could look at this thread. I am generating language files there. I did french, but as I do not speak it, the translation is likely to be rough/incomplete.
Regards
You could look at this thread. I am generating language files there. I did french, but as I do not speak it, the translation is likely to be rough/incomplete.
Regards
Re: Voice files for 9XR-PRO with ersky9x
Posted a pack that I made using the English voice from Google Translate.. Please read the first post carefully.
I decided to do a pack using this voice because everyone has access to it and it is excellent, and the best of all, free. Using the "Audacity" audio editor you can play the google translate text into it while recording the System sound internally.. All the basic files are done, so, you won't need to spend hours doing them as I did
João
I decided to do a pack using this voice because everyone has access to it and it is excellent, and the best of all, free. Using the "Audacity" audio editor you can play the google translate text into it while recording the System sound internally.. All the basic files are done, so, you won't need to spend hours doing them as I did
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
" These files are for using with the new test versions from 6th July on."
Where can we get the new test version that use the new voice pack .. ?
Thanks
Where can we get the new test version that use the new voice pack .. ?
Thanks
Re: Voice files for 9XR-PRO with ersky9x
Dude... when the he** do you ever go flying?
Thanks again for doing the heavy lifting so the rest of us can "disengage brain, engage fun mode" !
mnem
I'm not down here.
Thanks again for doing the heavy lifting so the rest of us can "disengage brain, engage fun mode" !
mnem
I'm not down here.
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Voice files for 9XR-PRO with ersky9x
Test versions are posted here: viewtopic.php?f=7&t=4676#p65894.With wrote:Where can we get the new test version that use the new voice pack .. ?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Voice files for 9XR-PRO with ersky9x
Yeah, nearly every day if the weather allows memnementh wrote:Dude... when the he** do you ever go flying?
And I still work and have time for the family..
Oh, and I do sleep too..... sometimes
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
Okay... my buddies are picking on me cuz my "Taranis wannabe" doesn't have Amber's dulcet tones emanating from the speaker; do we have a port of the Taranis sound pack for the Pro, or a package of Amber voice segments with the 9XR Pro file structure, or however that works?
I'm trying the Google voice packs now.
mnem
Steep learning curve, my hindfoot... more like a cliff.
I'm trying the Google voice packs now.
mnem
Steep learning curve, my hindfoot... more like a cliff.
Last edited by mnementh on Mon Aug 11, 2014 4:40 am, edited 1 time in total.
Re: Voice files for 9XR-PRO with ersky9x
Get the sound list file that is supplied with the PRO voice files, then rename/renumber the taranis pack accordingly. If you need to make some files, use the "openTX speaker" tool.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
I figured you might say that...
I'm a bit busy with hardware mods right now; trying to fix the pitiful speaker in this thing so the voice is halfway clear. Looks like I'm gonna have to do some serious building inside the TX case to get a decent soundbox. That bleeping Futaba Trainer port wastes a lot of space; if that stupid PCB weren't so danged unnecessarily long, I'd have another 20mm room to work with. Then I could just hack a pill bottle in there for a resonator.
I'm gonna try and find a better way than Dremeling half the Trainer Port bracket away...
mnem
Can you hear me NOW?!?
I'm a bit busy with hardware mods right now; trying to fix the pitiful speaker in this thing so the voice is halfway clear. Looks like I'm gonna have to do some serious building inside the TX case to get a decent soundbox. That bleeping Futaba Trainer port wastes a lot of space; if that stupid PCB weren't so danged unnecessarily long, I'd have another 20mm room to work with. Then I could just hack a pill bottle in there for a resonator.
I'm gonna try and find a better way than Dremeling half the Trainer Port bracket away...
mnem
Can you hear me NOW?!?
Re: Voice files for 9XR-PRO with ersky9x
Okay...
How exactly did you generate these files, dude? Where did you get the voice template? Curious in case I want to make my own model names...
mnem
*Noisy*
How exactly did you generate these files, dude? Where did you get the voice template? Curious in case I want to make my own model names...
mnem
*Noisy*
Re: Voice files for 9XR-PRO with ersky9x
For the speaker, on my test pro, I discarded the complete original speaker assembly, and bought a square/oval speaker. I think it measures 40mm x 20mm. I can take a picture and measure a spare that I have here if you want. Can also post a picture. That's the first mod.. the other is a bit more difficult and increases thw gain of the amplifier. But we have to replace a very very tiny smd resistor on the main board. The resistor is placed between the audio amp chip and 2 capacitors of the same size, and that makes it difficult to work on. These are all recommendations that we testers passed to HK. Ahh, my oval speaker is hot glued to the front of the radio. I opened a few more holes for the sound to come out.
For the audio files, I'm not quite sure what you mean. You mean how did I record the google translate voice?
João
For the audio files, I'm not quite sure what you mean. You mean how did I record the google translate voice?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Sv: Voice files for 9XR-PRO with ersky9x
I don't know exactly how the speaker in the pro is mounted, but general electronics manufacturers do not seem to understand that it is absolutely vital to have a tight seal around the edges of a small speaker. The air in front of the speaker must not be in contact with the air behind the speaker or the effect of the speaker is reduced significantly.
Some hot glue or silicone around the edge can work wonders in many cases. It certainly did in my Taranis.
Some hot glue or silicone around the edge can work wonders in many cases. It certainly did in my Taranis.
Re: Sv: Voice files for 9XR-PRO with ersky9x
You can use the OpenTX applications OpenTX Speaker or OpenTX Recorder to generate or record voice files. The files have a sound format that suits OpenTX, but should work for ersky9x as well.mnementh wrote:Okay...
How exactly did you generate these files, dude? Where did you get the voice template? Curious in case I want to make my own model names..
Alternatively you can use the Audacity application to record and convert voice files to the proper format. In this case you must spend some time on setting up and understanding Audacity.
Re: Voice files for 9XR-PRO with ersky9x
Well, no... I spent quite some time back in the day messing around with TTS; every voice uses a "Template" file (actually several in most cases) that is modulated to build words out of phonemes. I assumed João used a voice template and probably the TTS program in some variant of LINUX or some TTS program in Windoze; doesn't matter. Still the same process.
João, what did you use with Google Translate to make the files? Do they have some downloadable API I'm unaware of? (I know they did years ago; but I thought that had been long ago abandoned) How did you select a female British English accented voice instead of the default female American English accented voice that comes up when I use Google Translate online?
Also -
I've finished my speaker mod; using a 40mm round pancake speaker. It's a LOT better; I'll post pics; it's pretty easy. Just requires one to be brave and do a little cutting to remove that stupid reinforcement ridge right in the middle of the speaker area. Could you post pics of the gain mod? Is it based on the example circuit in the TA701 documentation?
Right now I'm looking for a slightly better quality speaker; mine is only rated to 250mw and it crackles a little at full volume. The problem is that unlike the Taranis, there is NO space to speak of behind the speaker, so very little room to make a megaphone chamber in front, and zero room for a resonating chamber behind.
This is what I was talking about when I was grousing about the poor design of the Trainer Port bracket; it is horribly wasteful of space. I'm thinking they designed around an existing off-the-shelf part; the only reason I can think of for that Futaba port being 3x as long as it needs to be in this application.
Thanks,
mnem
jhsa wrote:For the speaker, on my test pro, I discarded the complete original speaker assembly, and bought a square/oval speaker. I think it measures 40mm x 20mm. I can take a picture and measure a spare that I have here if you want. Can also post a picture. That's the first mod.. the other is a bit more difficult and increases thw gain of the amplifier. But we have to replace a very very tiny smd resistor on the main board. The resistor is placed between the audio amp chip and 2 capacitors of the same size, and that makes it difficult to work on. These are all recommendations that we testers passed to HK. Ahh, my oval speaker is hot glued to the front of the radio. I opened a few more holes for the sound to come out.
For the audio files, I'm not quite sure what you mean. You mean how did I record the google translate voice?
João
João, what did you use with Google Translate to make the files? Do they have some downloadable API I'm unaware of? (I know they did years ago; but I thought that had been long ago abandoned) How did you select a female British English accented voice instead of the default female American English accented voice that comes up when I use Google Translate online?
Also -
I've finished my speaker mod; using a 40mm round pancake speaker. It's a LOT better; I'll post pics; it's pretty easy. Just requires one to be brave and do a little cutting to remove that stupid reinforcement ridge right in the middle of the speaker area. Could you post pics of the gain mod? Is it based on the example circuit in the TA701 documentation?
Right now I'm looking for a slightly better quality speaker; mine is only rated to 250mw and it crackles a little at full volume. The problem is that unlike the Taranis, there is NO space to speak of behind the speaker, so very little room to make a megaphone chamber in front, and zero room for a resonating chamber behind.
This is what I was talking about when I was grousing about the poor design of the Trainer Port bracket; it is horribly wasteful of space. I'm thinking they designed around an existing off-the-shelf part; the only reason I can think of for that Futaba port being 3x as long as it needs to be in this application.
Thanks,
mnem
Last edited by mnementh on Mon Aug 11, 2014 3:56 pm, edited 1 time in total.
Re: Voice files for 9XR-PRO with ersky9x
well, my default was British English I suppose..
As I said before, you will have to set an audio recording program like "Audacity" to record the internal system sound from your computer. so, the program will record whatever is playing on the speakers.. That's how I did it.. Then, write the text, hit record on the audio program, and then hit the button on google translate so it speaks..
I use only online TTS engines to make my files as they are free. Like the one from Acapela demo..
João
As I said before, you will have to set an audio recording program like "Audacity" to record the internal system sound from your computer. so, the program will record whatever is playing on the speakers.. That's how I did it.. Then, write the text, hit record on the audio program, and then hit the button on google translate so it speaks..
I use only online TTS engines to make my files as they are free. Like the one from Acapela demo..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
Sorry; you replied while I was editing my post to add questions. Please refresh and see new questions in above post.
Okay... maybe I'll have to try a different approach with Google Translate. I don't see any way to choose a speaking voice on the online app; maybe come at it from a portal based in the UK.
Thanks,
mnem
A challenge...
Okay... maybe I'll have to try a different approach with Google Translate. I don't see any way to choose a speaking voice on the online app; maybe come at it from a portal based in the UK.
Thanks,
mnem
A challenge...
Re: Voice files for 9XR-PRO with ersky9x
I think that the oval speaker is the best for this radio.. I don't remember having to cut anything to install it. It did fit very well agains the front of the radio..mnementh wrote:
I've finished my speaker mod; using a 40mm round pancake speaker. It's a LOT better; I'll post pics; it's pretty easy. Just requires one to be brave and do a little cutting to remove that stupid reinforcement ridge right in the middle of the speaker area. Could you post pics of the gain mod? Is it based on the example circuit in the TA701 documentation?
Right now I'm looking for a slightly better quality speaker; mine is only rated to 250mw and it crackles a little at full volume. The problem is that unlike the Taranis, there is NO space to speak of behind the speaker, so very little room to make a megaphone chamber in front, and zero room for a resonating chamber behind.
This is what I was talking about when I was grousing about the poor design of the Trainer Port bracket; it is horribly wasteful of space. I'm thinking they designed around an existing off-the-shelf part; the only reason I can think of for that Futaba port being 3x as long as it needs to be in this application.
I will try to find a picture of the resistor mod but I stress that it is not so easy and if you're not good with the soldering iron (not saying that you can't work with one ), it is very easy to mess it up..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
About the resistor mod.. Check that R36 is 47K. If it is you don't need to change the resistor for more volume as it is already done. Please look here to find R36. Bottom right, just under the audio amp chip.
viewtopic.php?f=122&t=5659
Attached are a couple pics from the speakers some of us are using. As you can see it fits really good..
Bought mine from here:
http://www.reichelt.de/Full-Range-Speak ... &OFFSET=16
And a couple from china I think.. But the link doesn't work anymore.. It was on ebay.
João
viewtopic.php?f=122&t=5659
Attached are a couple pics from the speakers some of us are using. As you can see it fits really good..
Bought mine from here:
http://www.reichelt.de/Full-Range-Speak ... &OFFSET=16
And a couple from china I think.. But the link doesn't work anymore.. It was on ebay.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: Voice files for 9XR-PRO with ersky9x
What are the speaker dimensions, I have run a search on ebay and I found one that is 20.5mm x 40.2 x 8.8mm. from a seller in the US but postage to Oz is a bit steep. If this size will fit I will search locally to see what I can find.
http://www.ebay.com.au/itm/MRC-DCC-Deco ... 2a3d9cdc8f
http://www.ebay.com.au/itm/MRC-DCC-Deco ... 2a3d9cdc8f
Re: Voice files for 9XR-PRO with ersky9x
Maybe this also could fit.
http://www.ebay.de/itm/310640790924?ru= ... 26_rdc%3D1
(ebay number 310640790924)
Reinhard
http://www.ebay.de/itm/310640790924?ru= ... 26_rdc%3D1
(ebay number 310640790924)
Reinhard
Re: Voice files for 9XR-PRO with ersky9x
This one looks like it and it says it is 8 ohm which is important. But maybe you can get it cheaper in china. Try ebay.com.Suncoaster wrote:What are the speaker dimensions, I have run a search on ebay and I found one that is 20.5mm x 40.2 x 8.8mm. from a seller in the US but postage to Oz is a bit steep. If this size will fit I will search locally to see what I can find.
http://www.ebay.com.au/itm/MRC-DCC-Deco ... 2a3d9cdc8f
I was going to post the link to where I bought mine from but the listing doesn't exist anymore. Make sure you buy a couple just in case. China you know!!!!
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
That looks like it could work.. the specs seem to be right if they are correct. Membrane looks different from mine. Here is a picture.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
The stock speaker IS good quality ... it is the same speaker I provided with the Sky9x boards.
The way it was mounted ..back from the baffle is the problem.
Moving the speaker forward and using hot glue or Silicone to create a seal and hold it in place
will improve the output quality.
Also open up a few of the quasi speaker holes, to let let more sound out.
The rectangular speaker does fit in the space very nicely eg Digikey # 668-1361-ND
They make a "enclosed speaker" which might work as well (not tried)
http://www.digikey.ca/product-detail/en ... ND/4700907
-Brent
The way it was mounted ..back from the baffle is the problem.
Moving the speaker forward and using hot glue or Silicone to create a seal and hold it in place
will improve the output quality.
Also open up a few of the quasi speaker holes, to let let more sound out.
The rectangular speaker does fit in the space very nicely eg Digikey # 668-1361-ND
They make a "enclosed speaker" which might work as well (not tried)
http://www.digikey.ca/product-detail/en ... ND/4700907
-Brent
Re: Voice files for 9XR-PRO with ersky9x
The question is how do you put a round speaker to the front of the radio? I don't think it is possible as half of the speaker would not be in front of the holes, if you know what I mean. The rectangular speaker is a nearly perfect fit.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Voice files for 9XR-PRO with ersky9x
João -jhsa wrote: I think that the oval speaker is the best for this radio.. I don't remember having to cut anything to install it. It did fit very well against the front of the radio..
I will try to find a picture of the resistor mod but I stress that it is not so easy and if you're not good with the soldering iron (not saying that you can't work with one ), it is very easy to mess it up..
I think I can handle it... this is an 0603 size LED I made up as an indicator for my Bluetooth mod. You can see the wires for it in the speaker mod below.
As for the oval speaker; that's just evidence that sick minds... err, great minds think alike.
My original mod was to build a sealed soundbox. I cut a 15mm strip of plastic from a Drink Mix box like so.
Then I trimmed it to fit against the upper bulkhead of the TX and cut a notch out for the back of the [READY!] LED indicator, then committed Hot Glue Abuse to seal it all in place. Note that I cut out the brace on the upper bulkhead as well.
Next I fitted my 40mm replacement speaker; one can use the original 36mm speaker the same way.
A little reality check to make sure it will actually fit under the Trainer Port bracketry...
And more hot glue abuse to seal it in place. I tried it with both speakers sealed up this way; the stock speaker is about twice as loud and much clearer than before. The 40mm 8Ω 0.25W speaker is a little louder, and the overall tone is better operating without a resonating chamber so I went with it. But for ZERO DOLLARS out of pocket, just doing this mod with the stock speaker is a HUGE improvement.
http://www.ebay.com/itm/321307353026
Volume is now about 2.5x that of the stock arrangement. However, both speakers still sound "tinny"; this is a fact of life with Mylar speakers. I want better tonal quality, so next I'm going to try a 40mm x 28mm 4Ω speaker from this auction.
I expect to be able to build a small resonating chamber around it thanks to being able to set it lower inside the space; that should help greatly with overall sound quality.
I know the TA701 audio amp IC isn't rated for a 4Ω load; probably because it's already operating in BTL mode. But we already load it to 4Ω any time we plug in a set of 8Ω headphones (the design of the headphone jack parallels the load of both speakers) and I've used it that way on a couple sessions already with no discernible ill effects; so I'll be our guinea pig on the 4Ω speaker question. I think worst case scenario, if I just drop a 2.2Ω resistor in series we'll be more than okay; I've built a LOT of 6Ω speakers to go on 8Ω-rated amplifiers to get "just a little more" out of the setup.
Cheers!
mnem
*Wired*