Failsafe settings on Taranis & X8R

[johninarky]

I have set up my custom failsafe setting on Companion9x for the Taranis and the X8r but after download
I don't seem to have them stored in the Tx. How can I see if they are stored correctly and what is the
procedure for sending them to the Rx.
John

[Kilrah]

You should see them if you click Enter on the SET field next to Failsafe/custom in the model settings.
They're sent to the receiver every 9 seconds.

[johninarky]

Thanks as always Kilrah for your great help. I did as you suggested and here is what I see.
It's no wonder my motor goes on big time. Custom is selected in C9x menu.
I hope you a having a Great Christmas.
chan Tx numbers C9x settings
1 0 0
2 8.7 +90
3 9.7 -100
4 -8.1 -83
5 7.3 75
6 0 0
7 -7.3 -75
8 0 0
John

[Kilrah]

Just set them on the radio. It's best to do it live with the real controls so that you're sure of the response anyway.

[johninarky]

Thanks again. I'll do it that way for now.
John