ErskyTx Test Versions

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
EdwardMcRichy
Posts: 38
Joined: Sat Dec 09, 2017 4:31 am
Country: -
Location: Sahuarita Arizona

Re: Ersky9x Test Versions

Post by EdwardMcRichy » Sun Dec 16, 2018 10:30 pm

Quick question, I'm using the R9M and one of it's previous updates made a change to the 1w power mode so it essentially starts at 100mw and changes power up to 1w as the RSSI signal gets weaker. Is this update reflected in the latest test versions of firmware? I was looking at the test versions page and didn't see it in the notes. The version of firmware I was using on my QX7 is the 221 from the ER9x.com site. Just updated to 222d2. thanks in advance.

https://www.frsky-rc.com/r9m/
When I'm not flying I'm dreaming of flying, when I'm not dreaming of flying.....I'm asleep


budavaril
Posts: 49
Joined: Wed Feb 17, 2016 9:34 am
Country: United Kingdom
Location: London

Re: Ersky9x Test Versions

Post by budavaril » Sun Dec 16, 2018 10:38 pm

MikeB wrote:
Tue Nov 13, 2018 11:33 pm
I have posted r222 c9, which supports the R9M flex firmware on most radios.

Mike
openrcforums.com/forum/viewtopic.php?f=123&t=10792&sid=81f66c540e993eb4bb43e38e4e298c5a&start=30

AlessB
Posts: 18
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: Ersky9x Test Versions

Post by AlessB » Wed May 22, 2019 9:53 am

Mike, what is the difference release in 20 may and 21 may (222 release)?

budavaril
Posts: 49
Joined: Wed Feb 17, 2016 9:34 am
Country: United Kingdom
Location: London

Re: Ersky9x Test Versions

Post by budavaril » Wed May 22, 2019 9:55 am

One of the "curve" screen had some line missing bottom of the screen.
mentero wrote:HI,

Found a couple of lines missing at the right and bottom of the edit curve screen.

Version is 222 19.05.2019 and radio is 9XR.Pro but on a different box, with the inverted screen option checked, so maybe it is only just my radio.

Best,
Miguel



Image

budavaril
Posts: 49
Joined: Wed Feb 17, 2016 9:34 am
Country: United Kingdom
Location: London

Re: Ersky9x Test Versions

Post by budavaril » Wed May 22, 2019 10:35 am

Mike, is there any difference between this 222 release ( 21 may ) and 222d4 related of the 9xrPro?
Is this actualy can calling as R222d5 or "just" a collection of "everything until now" ?

Thanks,
Laszlo


User avatar
MikeB
9x Developer
Posts: 16546
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Ersky9x Test Versions

Post by MikeB » Wed May 22, 2019 3:14 pm

There are a couple of (small) bug fixes, like the curve graph above. The main change since "d4" is support for the FrSky X9Lite and the ACCESS protocol on it.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

budavaril
Posts: 49
Joined: Wed Feb 17, 2016 9:34 am
Country: United Kingdom
Location: London

Re: Ersky9x Test Versions

Post by budavaril » Wed May 22, 2019 3:27 pm

Thanks Mike for your answer.
By the way ACCESS protocol....
Do you have any information (what you allowed to share with us) about on "old" R9M, will be possible to using ACCESS protocol if we just change the firmware or there any hardware difference(s), or may already available just this new firmware was missing for the controller?

User avatar
MikeB
9x Developer
Posts: 16546
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Ersky9x Test Versions

Post by MikeB » Wed May 22, 2019 7:09 pm

I think it will be able to use ACCESS. Keep an eye on this page: https://www.frsky-rc.com/frsky-advanced ... l-release/ to see what is being released and when.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

budavaril
Posts: 49
Joined: Wed Feb 17, 2016 9:34 am
Country: United Kingdom
Location: London

Re: Ersky9x Test Versions

Post by budavaril » Wed May 22, 2019 7:22 pm

Thank you Mike. Sounds we have a hope.

vodkabears
Posts: 47
Joined: Thu Aug 23, 2018 5:37 am
Country: Russian Federation
Contact:

Re: Ersky9x Test Versions

Post by vodkabears » Thu May 23, 2019 6:07 am

Hi Mike. Is "21-May-2019 23:55" version the one that will be published at er9x.com?

User avatar
MikeB
9x Developer
Posts: 16546
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Ersky9x Test Versions

Post by MikeB » Thu May 23, 2019 2:29 pm

I'm just testing on several different radios, and found small bugs that are only on some. When I fix them, I build all the binary files to make sure I haven't caused any problems on other radios.
So this will be the version published, unless you are using a radio with a fixed bug (!), but there may be a new date.

Yesterday I found a problem with the top display on the X9E. That does not affect any of the other radios, but I have recompiled all the binaries.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

ufoDziner
Posts: 3
Joined: Wed Apr 08, 2015 2:54 am
Country: -

Re: Ersky9x Test Versions

Post by ufoDziner » Sat May 25, 2019 4:31 pm

Hello,
I'm interested in using Ersky9x on an X-Lite (original version). Does the erskyTx for X9Lite (R222) file include the reduced latency work you've done? I'll be using it with a crossfire micro, so I'm not sure that it makes a difference, but figured it would be worth asking anyway. Thanks!

Rad
Posts: 264
Joined: Wed Apr 20, 2016 3:43 pm
Country: -

Re: Ersky9x Test Versions

Post by Rad » Tue May 28, 2019 8:24 am

Hi Mike, not sure if this is the correct thread to write this.
I am experiencing the same glitch for quite a long time, with 9xtreme, and a 6 position switch.
If I turn the 6pos switch slowly, there is no problem, but If I turn it from pos 1 to 6 fast, the reversed color screen changes to nomal (I use reverse as default)

Video here: https://youtu.be/oNWnREkTcjU
I am using ersky9xProvR222d4, but with older versions I had the same issue.
My 9xr pro is fine.

EDIT: I have seen there is a bugs thread. Please somebody delete this post.

3blake7
Posts: 2
Joined: Sat Jul 06, 2019 4:47 pm
Country: -

Re: ErskyTx Test Versions

Post by 3blake7 » Sat Jul 06, 2019 4:50 pm

tried the x9 lite rom in:
ersky9xProvR222.zip 16-Jun-2019 20:51

Everything works, it binds (the x9lite rom on www.er9x.com wouldn't bind). I originally tried this because of dropout issues with D16 on SPI FrSky boards. Still having dropouts but they seem less frequent compared to OpenTx 2.3.0

https://www.rcgroups.com/forums/showthr ... ers/page14

User avatar
Kilrah
Posts: 10122
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ErskyTx Test Versions

Post by Kilrah » Sat Jul 06, 2019 5:23 pm

There will likely be changes to be made in the BF SPI code for it to work well with the new radios. It's not related to the radio's operating system, but to the RF module.

3blake7
Posts: 2
Joined: Sat Jul 06, 2019 4:47 pm
Country: -

Re: ErskyTx Test Versions

Post by 3blake7 » Sat Jul 06, 2019 10:16 pm

Kilrah wrote:
Sat Jul 06, 2019 5:23 pm
There will likely be changes to be made in the BF SPI code for it to work well with the new radios. It's not related to the radio's operating system, but to the RF module.
ok. people on rcgroups were saying the issue wasn't happening with pre 2.2.2 OpenTx and ErSkyTx, so I thought I would give it a try.

User avatar
Kilrah
Posts: 10122
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: ErskyTx Test Versions

Post by Kilrah » Sun Jul 07, 2019 7:12 am

OpenTX / ersky9x only have very little influence over what's sent over the air - all we can do is tell the module in what mode to operate with which options, and give it channel data. This works with everything but SPI receivers in the FC boards, which have tried to reimplement the RF protocol by reverse-engineering. Only possibility is that this has been done incompletely/incorrectly and something that is perfectly normal somehow throws it off.
We can't really help with that since we don't know anything about the actual RF sent out by the module.

SabreJet
Posts: 1
Joined: Sun May 12, 2019 3:24 pm
Country: -

Re: ErskyTx Test Versions

Post by SabreJet » Sun Aug 18, 2019 6:17 pm

What's the status of ErskyTX for the Jumper T16? Anything available?

User avatar
MikeB
9x Developer
Posts: 16546
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ErskyTx Test Versions

Post by MikeB » Sun Aug 18, 2019 8:52 pm

I have a version of erskyTx that runs OK on the T16, although I haven't published it yet. I may do so very soon. Note that, as with the 9XR-PRO when it first came out, the use of FrSky 'X' and FrSky 'D' protocols is disabled on the T16 until Jumper reach an agreement with FrSky to allow their use (which HK did for the 'PRO).

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


Post Reply

Return to “erskyTx (was ersky9x)”