I wonder if this would work... in the wiki and other sources the telemetry always uses separate wires from the CPU to the back board. As I have the USBASP on the back board, I realised MISO and MOSI are readily in the ribbon!
Comments?
FrSky telemetry sharing the ribbon with USBASP?
Re: FrSky telemetry sharing the ribbon with USBASP?
Great Mod, very clean...JayC wrote:
just curious as to what you have going on on the top right with resistor and transistor i think?
Thanks
Custom 9x with M64/Telemetry Mod
Re: FrSky telemetry sharing the ribbon with USBASP?
Backlight control. It connects to pin 17 of the processor.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: FrSky telemetry sharing the ribbon with USBASP?
ah, thanks... amazing..
Custom 9x with M64/Telemetry Mod
Re: RE: FrSky telemetry sharing the ribbon with USBASP?
Best looking mod ever seen !
Which kind of wire is the blue one ?
Which kind of wire is the blue one ?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: FrSky telemetry sharing the ribbon with USBASP?
It looks like kynar, wire-wrapping wire, to me. I use white kynar for my mods. It is solid core, and the insulation doesn't 'melt' when soldering.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: FrSky telemetry sharing the ribbon with USBASP?
+1. My favorite go to mod wire.MikeB wrote:It looks like kynar, wire-wrapping wire, to me. I use white kynar for my mods. It is solid core, and the insulation doesn't 'melt' when soldering.
Mike.