Late 2012, I asked for, and received help on this forum getting my T-Rex 500 DFC set-up with the ER9X radio system and the Micro-beast gyro.
Everything went great with that project, and my Micro-beast is now on my T-Rex 250 with my ER9X (working great).
Now, I'm trying to install the iKon FBL Gyro on my T-Rex 500 with the ER9X TX/RX. Certainly somebody has a similar model programmed, that I can at least start with. This programming is pretty confusing to me, but I know it can be done.
Thanks
Mike
iKon gyro (ms brain)
Re: iKon gyro (ms brain)
radio wise it should be the same programming as your beast. Follow the manual for the ikon, and you should be all set. I have a friend that recently got an ikon, unfortunately his died before he could fly it though.
-Gohst
Sent from my LG-P999 using Tapatalk 2
-Gohst
Sent from my LG-P999 using Tapatalk 2
-
- Posts: 13
- Joined: Fri Aug 03, 2012 1:25 am
- Country: -
Re: iKon gyro (ms brain)
It is basically the same, but the iKon has 'bank switching'. Apparently, after programming the three different banks, you switch from one bank to another with the 3 position switch. I'll also need throttle cut, throttle curves, and pitch curves. I'm trying to get it set up so that ID0 = bank one (iKon) and Thr. curve c1. ID1 = bank 2 etc...