jumper t16 with m9 gimbals stick inputs need inverting
Posted: Thu Jun 24, 2021 9:06 am
hi there , i had an jumper t16 in the draw for 12 months or so that had bad gimbals so i descided to transplant what i had that were some m9 gimbals , tight fit but they work however it seems the sticks need the signals inverted for inputs to go the correct way , is there a way of doing this ?
as it is all stick calibrate and work fine but all channels are backwards
thanks in advance
martin
as it is all stick calibrate and work fine but all channels are backwards
thanks in advance
martin