esc won't arm with taranis 9xd+
-
rpknowlton
- Posts: 1
- Joined: Thu Jul 02, 2020 1:43 pm
- Country: -
esc won't arm with taranis 9xd+
I'm using Frsky recievers and can't get the esc to arm. rcvr binds, channel 1 gets signal (tested with servo), get basic esc signal recognition notice (beebs) but won't arm esc. What am I don't wrong? thanks
-
pmullen503
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: esc won't arm with taranis 9xd+
Calibrate your ESC. Usually power up with throttle full (take your prop off). When the ESC goes into programming mode (series of beeps), zero the throttle. It should then arm.