Setting up Master/Multi

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
wilopaan
Posts: 130
Joined: Sun Sep 09, 2018 6:09 pm
Country: -

Setting up Master/Multi

Post by wilopaan » Sat May 23, 2020 9:08 pm

Hi all,

I try to use Master/Multi trainer setup using a Radioamaster TX16s and a Jumper T12.

On the trainer radio I use FS2A_RX on the internal RF-module an FlySky_2A on the T12. I manged to bind them and setup up some pupil/slave inputs from the T12 to the TX16s.

So long, so good.

But, how do I connect a receiver? Do I need an external RF-module in the TX16s (the trainer radio)?

Any hints?


User avatar
Kilrah
Posts: 10558
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Setting up Master/Multi

Post by Kilrah » Sat May 23, 2020 9:14 pm

Yes.

wilopaan
Posts: 130
Joined: Sun Sep 09, 2018 6:09 pm
Country: -

Re: Setting up Master/Multi

Post by wilopaan » Sat May 23, 2020 9:29 pm

Kilrah wrote:
Sat May 23, 2020 9:14 pm
Yes.
thanks


Post Reply

Return to “openTx”