Horus X10 Internal Module & External R9M

Hardware help and support for the FrSky Horus. (not yet released)
Post Reply
robbuckley
Posts: 1
Joined: Sat Jan 11, 2020 9:36 am
Country: -

Horus X10 Internal Module & External R9M

Post by robbuckley » Mon Jan 13, 2020 9:52 pm

I've got a Horus X10 (not ACCESS) on OTX 2.3.4

When I try to use the internal module (telemetry enabled to X8R Pro) and the external module with R9M (telemetry disabled to R9MM) together to give a redundant 2.4GHz /900MHz radio link, it all binds fine, but intermittently all servo movement stops.

Channel monitors move normally with stick inputs, telemetry remains connected & the green lights on all the receivers stay lit. There's just no movement from any servo on any channel for a few seconds, then servos will start moving again.

I've seen people on Youtube with this combination working fine, but mine's not having it at all. Anything I'm missing?


User avatar
Kilrah
Posts: 10652
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus X10 Internal Module & External R9M

Post by Kilrah » Tue Jan 14, 2020 4:57 am

There's a bug in all 2.3 versions with that combination. It was first reported yesterday and is being worked on.

User avatar
Kilrah
Posts: 10652
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus X10 Internal Module & External R9M

Post by Kilrah » Wed Jan 15, 2020 5:38 pm

2.3.5 is now released with the fix for this.


Post Reply

Return to “FRSky Horus radio”