I would like to know if there is a way to copy a model from my TH9X/AR9X Tx to my 9XR-PRO ?
Thanks
MP
copy
Re: copy
Depending on what firmware and version you are running on them, there are a few ways, yes.
Do please let us know that info and we will tell you how to do it
João
Do please let us know that info and we will tell you how to do it
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: copy
Do you use eepSkye on your PC ?
You can find it here if not: http://www.er9x.com/
You can find it here if not: http://www.er9x.com/
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: copy
On Ar9x, model select menu, select the model press menu, select backup.
Model will be saved on the SD Card.
Conect radios ti the computer. Copy models from one radio to the other radio's SD Card.
On the 9XR-PRO, go to model select menu, then to an empty slot, press menu, select Restore, select model, press menu.
Or use the eepskye to download both radio eeproms, open both at the same time, drag models from one to the other, and burn the 9XR-PRO eeprom with the new models back to the radio.
If you have bluetooth on both radios, you can send models or other files over the air from one model to the other.
João
Model will be saved on the SD Card.
Conect radios ti the computer. Copy models from one radio to the other radio's SD Card.
On the 9XR-PRO, go to model select menu, then to an empty slot, press menu, select Restore, select model, press menu.
Or use the eepskye to download both radio eeproms, open both at the same time, drag models from one to the other, and burn the 9XR-PRO eeprom with the new models back to the radio.
If you have bluetooth on both radios, you can send models or other files over the air from one model to the other.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: copy
Please let us know if it worked..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW