eepe Library

Hardware help and support for the FrSky Taranis
Post Reply
Scram
Posts: 33
Joined: Tue Jun 23, 2015 4:46 pm
Country: United Kingdom

eepe Library

Post by Scram » Thu Nov 07, 2019 7:34 pm

Is there an eepe Library anywhere that anyone knows about?

I need eepe's for my X9D Plus to fly my Sceadu nitro helicopters. I have searched all over and left requests on 2 forums, to no avail.

So I have produced a simple program following the OpenTx University instructions but I'm sure there are more sophisticated programs that folks have devised. I have been using an eepe for my F3F gliders - 4 servo wings and lots of clever mixing, this program devised and made available by a fellow glider guider.

As stated on each of the OpenTx upgrade pages, it is the users own responsibility to check that the program is doing what is required so there can be no comeback on the writer. Therefore I see no reason why this cannot be done. Is there such a library anywhere?

Jerry


rdeanchurch
Posts: 674
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: eepe Library

Post by rdeanchurch » Thu Nov 07, 2019 10:09 pm

Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1

User avatar
bob195558
Posts: 2128
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepe Library

Post by bob195558 » Fri Nov 08, 2019 1:38 pm

Hi Jerry (Scram),
I do not know of any "eepe library" where people post there
eeprom info for there particular model settings.

I believe there are many reasons for why this maybe not be piratical.
Because there is a great amount of options to be selected in Er9x or ErSkyTx firmware for
each model, it would be almost impossible to have a packaged eeprom that would be right for you.

If you have not found this yet, here is where you can fine info
about Er9x or ErSkyTx firmware and eepe/eepSkye programs:
(http://www.er9x.com/).

Also if you list your hardware and software you are using
and explain where you are having difficulty,
I believe someone will be happy to help you. :)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
bob195558
Posts: 2128
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepe Library

Post by bob195558 » Fri Nov 08, 2019 1:56 pm

:?:
Hi Jerry (Scram),
Are you using opentx firmware ?

If you are, then you do not use eepe, as eepe is for er9x radio firmware.
eepe Not for opentx radio firmware.

You can use erSkyTx firmware on your Taranis and you would then use the
eepSkye program on your computer.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
Kilrah
Posts: 10271
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: eepe Library

Post by Kilrah » Fri Nov 08, 2019 2:02 pm

Old versions of OpenTX did use eepe files before the extension was changed to otx.


Scram
Posts: 33
Joined: Tue Jun 23, 2015 4:46 pm
Country: United Kingdom

Re: eepe Library

Post by Scram » Sat Nov 09, 2019 8:29 am

Thanks for the responses.

I am using the Taranis X9D as per my OP. It is running OpenTx 2.1.9 which I think is all the info needed for finding compatible .eepe files

I do not intend to update my OpenTx to a later version, seems unnecessary - it ain't broke :-)

Scram
Posts: 33
Joined: Tue Jun 23, 2015 4:46 pm
Country: United Kingdom

Re: eepe Library

Post by Scram » Sat Nov 09, 2019 8:36 am

rdeanchurch wrote:
Thu Nov 07, 2019 10:09 pm
At least one
https://rcsettings.com/index.php/viewca ... elicopters
Thank you. I think I found just what I'm looking for. Will enable me to check my own work and it will be checked on Companion before anything else.

Cheers, much appreciated. Jerry


Post Reply

Return to “FrSky Taranis radio”