S6R receiver questions

General Help and support for the Taranis Radio.
Post Reply
rwilabee
Posts: 16
Joined: Sat May 25, 2019 8:20 pm
Country: -

S6R receiver questions

Post by rwilabee » Sat Jul 13, 2019 10:01 pm

Do you just have to set up one extra swtich to do the torque rolls. Right now I have a 3 position switch for Full Stabilization, Slight Gyro help, and no help at all. Can you explain how you set it up for the torque rolls. I guess there is a calibration once everything is installed in the airplane when you move the sticks to their full amounts and then come out of it with throttle. If you have dual rates to you do it with no rates turned on or with the rates that you fly with?


User avatar
Kilrah
Posts: 10271
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S6R receiver questions

Post by Kilrah » Sun Jul 14, 2019 8:18 am

Enabling a mode is just about setting the control channel to the appropriate value in whatever way you want.

Calibration of the throws must be done with the highest throws you have on your setup, the point of it is to know how not drive servos past mechanical binding.

Post Reply

Return to “General help (FrSky Taranis radio)”