Losing bind

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
Post Reply
hansvh
Posts: 3
Joined: Wed Jul 10, 2019 4:46 pm
Country: -

Losing bind

Post by hansvh » Wed Jul 10, 2019 4:56 pm

Hi Mike/Jao

i have a Turnigy 9xr pro with R 221 revb-x date 19-02-2018 binding with orange r615 receievers and with the whoop: Mobula 7 dsmx and with a
LDARC 1900 Drone with Lemon RX sattelite . Problem is that i cannot switch model and not lose the bind.
Can you tell me where i can "see" the bind and check if something is wrong, or s :D houd i update to another version (what version?),

Thanks.


User avatar
Kilrah
Posts: 10272
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Losing bind

Post by Kilrah » Wed Jul 10, 2019 5:43 pm

Binding is a module function but you did not say what module you were using.

hansvh
Posts: 3
Joined: Wed Jul 10, 2019 4:46 pm
Country: -

Re: Losing bind

Post by hansvh » Thu Jul 11, 2019 5:41 pm

It is the Orange RX 2.4 GHz telemetrie Module for Turnigy (XR Pro
https://hobbyking.com/nl_nl/orangerx-2- ... tible.html

User avatar
Kilrah
Posts: 10272
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Losing bind

Post by Kilrah » Thu Jul 11, 2019 6:47 pm

There are 4 different DSM transmission modes. When you bind the module selects the proper one for the RX that you've bound. When you change to another receiver that requires a different type that module requires you to either manually switch between the modes using some pattern of pressing the bind button to reach the correct one or to rebind. Refer to module manual.

hansvh
Posts: 3
Joined: Wed Jul 10, 2019 4:46 pm
Country: -

Re: Losing bind

Post by hansvh » Sat Jul 13, 2019 2:38 pm

Thank you Kilrah for your input
I think the mistake i made is not getting a new id on the module for every new receiver.
Problem solverd :D :D Thx


User avatar
Kilrah
Posts: 10272
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Losing bind

Post by Kilrah » Sat Jul 13, 2019 4:22 pm

No, you should never change the ID on the module unless you have a conflict with another user. Changing ID will require rebinding any receiver so it doesn't help you.


Post Reply

Return to “erskyTx (was ersky9x)”