OpenTX X10S to Tarranis QX7

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
rwilabee
Posts: 16
Joined: Sat May 25, 2019 8:20 pm
Country: -

OpenTX X10S to Tarranis QX7

Post by rwilabee » Tue Jul 09, 2019 1:00 am

Would it be possible to copy a file from an X10S in OpenTX Companion and upload it to a Tarranis QX7


User avatar
kalle123
Posts: 739
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: OpenTX X10S to Tarranis QX7

Post by kalle123 » Tue Jul 09, 2019 5:30 am

Could you specify the type of file, you want to copy?

br

rwilabee
Posts: 16
Joined: Sat May 25, 2019 8:20 pm
Country: -

Re: OpenTX X10S to Tarranis QX7

Post by rwilabee » Tue Jul 09, 2019 2:53 pm

The file that you save when you back up your models.

tonnie78
Posts: 96
Joined: Mon Jan 12, 2015 9:33 am
Country: -

Re: OpenTX X10S to Tarranis QX7

Post by tonnie78 » Wed Jul 10, 2019 4:17 am

That will not work as far as I know. To copy models from one transmitter to the next, you need to use Companion.

Companion will convert the data for the format used in the X10s to the format for the X7

rwilabee
Posts: 16
Joined: Sat May 25, 2019 8:20 pm
Country: -

Re: OpenTX X10S to Tarranis QX7

Post by rwilabee » Wed Jul 10, 2019 7:00 pm

tonnie78. That is what I mentioned in my original post. Using Companion to copy models from the X10S to the X7.


tonnie78
Posts: 96
Joined: Mon Jan 12, 2015 9:33 am
Country: -

Re: OpenTX X10S to Tarranis QX7

Post by tonnie78 » Wed Jul 10, 2019 9:16 pm

Sorry, I didn't fully understand the opening post. If you set up both transmitters in Companion, then I think you can drag and drop a model from one radio to the next in Companion

rwilabee
Posts: 16
Joined: Sat May 25, 2019 8:20 pm
Country: -

Re: OpenTX X10S to Tarranis QX7

Post by rwilabee » Wed Jul 10, 2019 9:23 pm

Perfect. That is what I'm hoping.

User avatar
Kilrah
Posts: 10185
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: OpenTX X10S to Tarranis QX7

Post by Kilrah » Thu Jul 11, 2019 7:28 am

Set companion to an X7 profile, read your X7, read/open a file from your X10, drag models to X7 window, check/rework them because of the different controls, write to X7

thebriars0
Posts: 105
Joined: Wed Dec 02, 2015 9:25 pm
Country: United Kingdom

Re: OpenTX X10S to Tarranis QX7

Post by thebriars0 » Tue Jul 16, 2019 7:06 pm

I would also add:

Do check that the function of each facet of your model setup works as expected on your model before flying. Occasionally not everything is converted exactly.


Post Reply

Return to “openTx”