Comeback

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Comeback

Post by jhsa » Sun Jun 02, 2019 9:53 am

Test versions os Er9x are also stable.. :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


User avatar
nsf
Posts: 177
Joined: Mon May 07, 2012 4:32 pm
Country: Portugal
Location: Aveiro

Re: Comeback

Post by nsf » Sun Jun 02, 2019 12:18 pm

An update.
The 9x with the stock board seems to be ok according to you guys.
This morning I grabbed the sky9x and managed, without any problems, to install the latest stable version (r221), and update the coprocessor to 107. Is this the most recent?
However, there is something I would like to change, the voices.
With the opentx I had installed, all voice prompts where in my native language (portuguese-pt), and with ersky9x I have to use english. That is not a problem, but I would prefere in portuguese from portugal (not brasil). Are they availiable?
I could use the ones I have, but I need to remane them, because they dont match to the ones used by ersky9x. For example, when I power the radio it anounces (in portuguese) 28, or if I move the throttle up is says 27. :lol:

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Comeback

Post by jhsa » Sun Jun 02, 2019 8:25 pm

I am Portuguese but I use English.. You can use TTSAutomate to generate a Portuguese Voice Pack. But you need to provide the file to generate it. So, I think your best option is to rename your files :)
Also, ErskyTX might not handle the Portuguese numbers correctly. I don't know if OpenTX did. Numbers like Cento e vinte e cinco..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
nsf
Posts: 177
Joined: Mon May 07, 2012 4:32 pm
Country: Portugal
Location: Aveiro

Re: Comeback

Post by nsf » Tue Jun 11, 2019 3:54 pm

Sorry guys for the lack of feedback, but in the last few days I have been tinkering with the firmware in the radios and the flight controllers in the quads, trying to get back up to date.
On question if someone can help me or point me in the right direction, although it may be off topic.
As mentioned in previous posts, I managed to flash er9x on a turnigy 9x with a stock board and erskytx on a turnigy 9x with sky9x board. I would like to test opentx in the sky9x board but I dont know how flash it. On the radio with the stock board I managed to do it, but went back to er9x, but I dont know how to do it with the sky board.
I assume I cant flash it through the radio. Can I do it with companion?

Daedalus66
Posts: 1810
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Comeback

Post by Daedalus66 » Tue Jun 11, 2019 5:09 pm

ERSky9x was developed specifically for the Sky board, as the name implies. Mike B was the developer and still supports it here.


User avatar
nsf
Posts: 177
Joined: Mon May 07, 2012 4:32 pm
Country: Portugal
Location: Aveiro

Re: Comeback

Post by nsf » Tue Jun 11, 2019 6:11 pm

Daedalus66 wrote:
Tue Jun 11, 2019 5:09 pm
ERSky9x was developed specifically for the Sky board, as the name implies. Mike B was the developer and still supports it here.
I know, and it's a great firmware, but I would like to try openTX for the sky board, and if I don't like it I go back to Ersky9x, like I did in the stock board.

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Comeback

Post by jhsa » Tue Jun 11, 2019 6:23 pm

Then, just download and install companion, download the openTX firmware for skyboard using companion, and flash it.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
nsf
Posts: 177
Joined: Mon May 07, 2012 4:32 pm
Country: Portugal
Location: Aveiro

Re: RE: Re: Comeback

Post by nsf » Tue Jun 11, 2019 8:23 pm

jhsa wrote:Then, just download and install companion, download the openTX firmware for skyboard using companion, and flash it.

João
Thank João. Just that? No problems doing that having Ersky9x installed? And if I want to go back to Ersky9x just flash it with eepe?

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Comeback

Post by jhsa » Tue Jun 11, 2019 9:05 pm

No, you flash it with Eepskye. Eppe is for Er9x, Eepskye is for ErskyTX (Ersky9x).

Make sure you save the radio eeprom to your computer, so you don't lose your models and settings before you flash the firmware.
Models are not compatible.. Better saying, eeprom from openTX and ErskyTX are not compatible.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
nsf
Posts: 177
Joined: Mon May 07, 2012 4:32 pm
Country: Portugal
Location: Aveiro

Re: Comeback

Post by nsf » Fri Jun 14, 2019 10:05 pm

What's the name of the wav file that plays in ErskyTX when the radio is shut down. Can't find it in the voice folder.

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Comeback

Post by jhsa » Fri Jun 14, 2019 11:36 pm

SHUTDOWN.wav
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


Post Reply

Return to “er9x”