X9D - Stuttering Noise and no startup

General Help and support for the Taranis Radio.
Post Reply
JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

X9D - Stuttering Noise and no startup

Post by JThibaut » Sun Apr 14, 2019 5:11 pm

When i tried to switch on my X9D, all I got is flashing of the screen with some ‘stuttering’ noise, but Taranis Will not start up. See attached video.
D68FD793-93FD-4A9B-8744-648F8720FDEF.MOV
Stuttering startup
(9.33 MiB) Downloaded 10 times
When starting up in resetmode, screen works normal. When I exit, noise begins Alain.
I tried disconnecting battery and the module in backboard but no help there.
Suggestions?


User avatar
MikeB
9x Developer
Posts: 16349
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: X9D - Stuttering Noise and no startup

Post by MikeB » Sun Apr 14, 2019 9:43 pm

Has this just starting to happen, or have you done any firmware updates?

Mike
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

Re: X9D - Stuttering Noise and no startup

Post by JThibaut » Mon Apr 15, 2019 6:44 am

Just like that. (Have to say I bought it second hand). Worked for two days and then gave me this when I started it up the third time.

Bronson06
Posts: 1
Joined: Mon Mar 05, 2018 12:36 am
Country: -

Re: X9D - Stuttering Noise and no startup

Post by Bronson06 » Mon Apr 15, 2019 8:24 am

Make sure your SD card located in the battery compartment is fitted properly...

Sent from my LM-Q710.FGN using Tapatalk


JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

Re: X9D - Stuttering Noise and no startup

Post by JThibaut » Mon Apr 15, 2019 12:18 pm

Tried SD card, but did not help.


User avatar
Kilrah
Posts: 9933
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D - Stuttering Noise and no startup

Post by Kilrah » Mon Apr 15, 2019 12:26 pm

Might be worth trying to reflash the firmware.

JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

Re: X9D - Stuttering Noise and no startup

Post by JThibaut » Mon Apr 15, 2019 2:07 pm

Seems there is not enough space on SD card. Will have to buy bigger one for that...

User avatar
kalle123
Posts: 724
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: X9D - Stuttering Noise and no startup

Post by kalle123 » Mon Apr 15, 2019 3:15 pm

JThibaut wrote:
Mon Apr 15, 2019 2:07 pm
Seems there is not enough space on SD card. Will have to buy bigger one for that...
Take the SD card from the Taranis. Backup the card content on your computer.

Read and follow the procedure here

https://oscarliang.com/flash-opentx-firmware-taranis/


A 1GB SD card is totally sufficient for use.

br

User avatar
Kilrah
Posts: 9933
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D - Stuttering Noise and no startup

Post by Kilrah » Mon Apr 15, 2019 3:20 pm

JThibaut wrote:
Mon Apr 15, 2019 2:07 pm
Seems there is not enough space on SD card. Will have to buy bigger one for that...
Uh no, it's impossible to find a card too small. Card might be corrupted, or filled with logs you could delete.

JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

Re: X9D - Stuttering Noise and no startup

Post by JThibaut » Mon Apr 15, 2019 4:06 pm

Flashing did not help...

JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

Re: X9D - Stuttering Noise and no startup

Post by JThibaut » Tue Apr 16, 2019 12:27 pm

Also did the complete Oscar Liang works (Open tx), but also no help there. Something else broken?

User avatar
Kilrah
Posts: 9933
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D - Stuttering Noise and no startup

Post by Kilrah » Tue Apr 16, 2019 1:16 pm

Yeah, really sounds like there's a hardware fault.

JThibaut
Posts: 7
Joined: Sun Apr 14, 2019 5:02 pm
Country: Belgium
Location: Kortrijk

Re: X9D - Stuttering Noise and no startup

Post by JThibaut » Tue Apr 16, 2019 8:08 pm

But isn’t it strange then that the screen works perfectly on the set-up screens? (I used them to flash it).
Could TX module cause this?


Post Reply

Return to “General help (FrSky Taranis radio)”