Using ER9X on Flysky 9X Tx with eePe Link software

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
viknik
Posts: 19
Joined: Tue Sep 25, 2018 11:33 am
Country: -

Re: Using ER9X on Flysky 9X Tx with eePe Link software

Post by viknik » Tue Oct 02, 2018 7:19 pm

OK faidos, thanks, I've just had a look on Ebay and there seems to be different specs available for the atmega 2561, so would need some guidance I'm afraid on which is the correct one.. 8au or 16au and 4kb or 8kb or 16 kb, (all dutch to me)for example, but will also see if Mike can shed any other options, I have to say soldering in the chip looks daunting...….

Sorry to be an ongoing nuisance.

thanks. Vic


User avatar
jhsa
Posts: 18607
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Using ER9X on Flysky 9X Tx with eePe Link software

Post by jhsa » Tue Oct 02, 2018 7:27 pm

I believe it is the 16AU.
Yeah, let's wait and read Mike's opinion..

No problem and no nuisance at all, we all learn while trying to solve the problems.. :) ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 16266
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Using ER9X on Flysky 9X Tx with eePe Link software

Post by MikeB » Tue Oct 02, 2018 10:10 pm

ATmega2561-16AU

If you currently have the Tx working, with er9x-128.hex flashed, try reading the EEPROM using eepe, then writing it back and see if the Tx continues to work correctly.

Mike
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

viknik
Posts: 19
Joined: Tue Sep 25, 2018 11:33 am
Country: -

Re: Using ER9X on Flysky 9X Tx with eePe Link software

Post by viknik » Wed Oct 03, 2018 12:08 pm

Well, firstly I've checked the 'good' TX and found that too has a 'GREEN' chip, splendid!! At least I know if I have further trouble I should find someone who can change the chips, thanks for the advice for the 2561 au16.

BUT, on the plus side, I saved the model settings on the good Tx which was running on the er9x hex, set the fuses, and flashed the er9x128 hex onto it. the warning hand came up at start to say throttle not set, so know the firmware has changed.. and the model settings were still there!!!! So saved model settings from good TX to eepe as separate file then flashed them to the 'suspect' TX.... and it worked :D :D .. so that does seem to have been the culprit. I hadn't flashed the correct firmware in the first place, slapped wrist all round...(I guess the danger of trying to join the computer radio age and realising the kit I bought came with crappy firmware, learning about your ER9X firmware and trying to wade through new territory without a map)...... I hope that it will also account for the TX 'failing' both while setting up new model memory and while flying.

Apart from the difficulties I have been having I have to say I as someone who has fought shy of computer Radios for so long, I am hooked on the versatility and scope embraced by your firmware, in fact two of my friends are talking of ditching their spectrum kit for the versatility of ER9X.

Many, many thanks for all your help and patience, I am very much in your debt for persevering with what to me has been a very frustrating experience.

I am sorry it appears to have steed from my not understanding which version was required, but glad it seems nothing more serious (providing the little bleeder continues to behave) with the TX. it is interesting to note that both TX have GREEN chips but have behaved differently on the same firmware, difference in component tolerances I suppose??

For reference, If I have any further issues I will let you gentlemen know in case it helps anyone else in the future. I note you have a donation page, I will make a contribution in due course in appreciation.

With kindest regards, and thank you again.

Vic

User avatar
jhsa
Posts: 18607
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Using ER9X on Flysky 9X Tx with eePe Link software

Post by jhsa » Wed Oct 03, 2018 12:17 pm

Good that you made it work, wonderful, well done :D
I would do some serious bench testing on that TX before using it to fly a model that I really like :)

Good luck :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


viknik
Posts: 19
Joined: Tue Sep 25, 2018 11:33 am
Country: -

Re: Using ER9X on Flysky 9X Tx with eePe Link software

Post by viknik » Wed Oct 03, 2018 12:21 pm

I wildo, Thanks and happy flying.

Vic


Post Reply

Return to “Software”