Is that possible to adjust backlight color on per-model basis with current ErSky9x? If not, could it be added?
I suppose MikeB has the answer
Per-model backlight color
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Per-model backlight color
You may assign a global variable for each of the three brightness values (hold MENU down for a LOOONG time to toggle to a GVAR).
Then set the three GVAR values to set the colour.
Mike.
Then set the three GVAR values to set the colour.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Per-model backlight color
The only problem is that we lose those GVARs for other things as they become global
Would it be possible to implement the backlight on a per model basis?
Maybe in the voice alarm menu, or a sub menu of that one called backlight..
We could adjust the 3 RGB values, a switch, and probably an option to flash it.
Just an idea
João
Sent from my thor using Tapatalk
Would it be possible to implement the backlight on a per model basis?
Maybe in the voice alarm menu, or a sub menu of that one called backlight..
We could adjust the 3 RGB values, a switch, and probably an option to flash it.
Just an idea
João
Sent from my thor using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Per-model backlight color
How many GVARs do you use that you can't afford to allocate 1, 2 or 3 to the backlight operation?
Note that there are 7 GVARS, but only the first 5 may be used in many places, so 6 and 7 are possibly available for the backlight anyway.
Mike.
Note that there are 7 GVARS, but only the first 5 may be used in many places, so 6 and 7 are possibly available for the backlight anyway.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Per-model backlight color
Ok, then perhaps would be nice to increase the number of GVARs as assigning them permanently to the backlight would leave only 4 for normal programming. In some cases that is not enough in my opinion..
Or maybe just implementing 3 more GVAR's specifically for the backlight..
The reason to have a specific backlight setting is that people see it in a menu and will actually use it.
Otherwise, using GVARs, no one will know that the feature is there, unless he/she read these posts.. And these posts will soon be hidden among thousands of other posts..
A manual is also inexistent at the moment..
Thanks
João
Or maybe just implementing 3 more GVAR's specifically for the backlight..
The reason to have a specific backlight setting is that people see it in a menu and will actually use it.
Otherwise, using GVARs, no one will know that the feature is there, unless he/she read these posts.. And these posts will soon be hidden among thousands of other posts..
A manual is also inexistent at the moment..
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Per-model backlight color
Thanks! That will do for now, set all my models to different colours
What else do you use GVARs for?
What else do you use GVARs for?