Hi,
I need help for those have experience for lipo size heat shrink tubing.
I'm currently stuck what size can I get for my 3s lipo around 2200mah - 3500mah.
Google did not help me that much my lipo even have different mah the size was similar.
Anyone can give me size for this heat shrink tubing, for common 3s 2200mah. Need want to order 100mm/88mm but not sure can be fit or to big.
Thanks
Sent from my Redmi Note 3 using Tapatalk
Heat Shrink tube lipo 3s 2200mah
Re: Heat Shrink tube lipo 3s 2200mah
Just measure your battery...
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Heat Shrink tube lipo 3s 2200mah (Heart Shrink Tubing Sizing)
Heart Shrink Tubing Sizing: 2:1 Shrink Ratio
. (https://www.google.com/webhp?sourceid=c ... ing+sizing)
I to, sometimes have difficulty using web search engines, I find the way we are asking the question makes the difference.
Add Edit: I think you will want to consider ordering size: 3/16 (2:1 Shrink Ratio when expanded: .1875", will shrink down to .0937").
Bob B.
. (https://www.google.com/webhp?sourceid=c ... ing+sizing)
I to, sometimes have difficulty using web search engines, I find the way we are asking the question makes the difference.
Add Edit: I think you will want to consider ordering size: 3/16 (2:1 Shrink Ratio when expanded: .1875", will shrink down to .0937").
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).