i stumble upon this, the PDF file at the end is the template.
Turnigy 9x Screen Protector
*Find some protectors to use. Ebay has really cheap iPhone protectors, something like $1 for 5.
*Download and print out the template PDF at 1:1 scale on A4 using Actual size in the Adobe PDF Reader print dialogue. The scaling is important otherwise Adobe Reader will try to scale the document to suit your printer's margin settings, throwing the sizing off.
*Cut out template using a scalpel or knife. You may want to cut slightly smaller (no more than say 2 or 3mm) than the template to prevent edges sticking out and catching.
*Attach template to correct side of protector using double sided tape.
*Cut the protector using the template.
turnigy_9x_screen_templatereva.pdf >>>
http://rw.id.au/wiki/_media/rc:9x:turni ... tereva.pdf
Turnigy 9x Screen Protector
- MojoMaestro
- Posts: 143
- Joined: Sun Jan 29, 2012 1:32 pm
- Country: -
- Location: Montreal, Quebec, CANADA
Turnigy 9x Screen Protector
Verus Amicus est Tanquam Alter Idem
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: Turnigy 9x Screen Protector
And you removed the protective plastic?
Just cut it on some vinyl... clear vinyl,,,
Just cut it on some vinyl... clear vinyl,,,
-
- Posts: 24
- Joined: Sat Feb 11, 2012 7:38 am
- Country: -
- Location: Cleveleys, Lancashire
Re: Turnigy 9x Screen Protector
I use iPad screen protectors from Poundland. you can get loads of smartphone and tx screen protectors out of one of them! Nice to actually have a file for it though- thank you.
Anyone got the template for the 8FG? I found one on a heli forum but couldn't be arsed to register just to get it.
Anyone got the template for the 8FG? I found one on a heli forum but couldn't be arsed to register just to get it.