New Features Wish List
Re: Outputs?
As long as we're going crazy with feature requests, I've got one. How about using some outputs to turn different modules on and off by model memory.
ie. Model 1 - FrSky module, PPM
Model 2 - Spektrum Module, DSM2
Power to the module would be automatic upon model selection. I wouldn't mind making a power board with FETs etc, to handle the switching, if the software can do the rest.
As for cases, Ive wondered for years, if everybody leaves their antenna bent to one side, why didn't the case designers just put the antenna in the handle already? Now I may have to do just that. Thanks for the inspiration.
-Dan
ie. Model 1 - FrSky module, PPM
Model 2 - Spektrum Module, DSM2
Power to the module would be automatic upon model selection. I wouldn't mind making a power board with FETs etc, to handle the switching, if the software can do the rest.
As for cases, Ive wondered for years, if everybody leaves their antenna bent to one side, why didn't the case designers just put the antenna in the handle already? Now I may have to do just that. Thanks for the inspiration.
-Dan
Re: Re: New Features Wish List
How about having sub directories for model organization. Aero--->Elec/glow/gas, Glider--->Elec/DLG, Heli--->Elec/glow/gas, Surface---H2O/pave...etc. Having the ability to name and create your own directory structure.
Re: Re: New Features Wish List
Since we have sound how about being able to assign sounds to the alarms in a mix and for that mater whatever alarms there are..."YO, YOU LEFT YOUR RADIO ON STUPID".
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: New Features Wish List
This is the essence of how open9x does it. Hence my pointing out in the other thread that we need to re-think the way for ersky9x.Reacher10 wrote:Since we have sound how about being able to assign sounds to the alarms in a mix and for that mater whatever alarms there are..."YO, YOU LEFT YOUR RADIO ON STUPID".
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Re: New Features Wish List
We've been waiting for that for the er9x as well, or is it going only on the new board??
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 121
- Joined: Mon Jan 02, 2012 9:56 am
- Country: -
Re: Re: New Features Wish List
what do you think about add a magnetometer to the board?
useful for know where the plane is and align the directional antenna in case you don't have a tracking antenna system,
maybe useful too for find it in case of lost... but for this i find better connect the radio to an android device with GPS
for what else could be useful ¿?
useful for know where the plane is and align the directional antenna in case you don't have a tracking antenna system,
maybe useful too for find it in case of lost... but for this i find better connect the radio to an android device with GPS
for what else could be useful ¿?
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: Re: New Features Wish List
dont know how usefull a magnetometer would be in a transmitter (rf may interfere with it) wouldn't a 1 or 2 axis gyro work better for that purpose?
Re: Re: New Features Wish List
The magnemometer sounds like it would be used as a compass to get the right direction to a downed plane. I guess if you were to do this you would also need a gps in the plane and the tx so the tx could figure out the positions of both and compute the direction from that.
-gohst
Sent from my LG-P999 using Tapatalk 2
-gohst
Sent from my LG-P999 using Tapatalk 2
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: Re: New Features Wish List
well what i would be worried about is that a magnetometer also picks up EM fields such as a rf circuit
-
- Posts: 236
- Joined: Tue Dec 27, 2011 11:19 pm
- Country: -
- Location: Don Mills, Ontario
Re: Re: New Features Wish List
I would be worried that it would add cost, but no real value.
I can't even imagine the circumstances under which it would ever be of any use to me.
Perhaps OSRC will have one?
Pat MacKenzie
I can't even imagine the circumstances under which it would ever be of any use to me.
Perhaps OSRC will have one?
Pat MacKenzie
-
- Posts: 121
- Joined: Mon Jan 02, 2012 9:56 am
- Country: -
Re: Re: New Features Wish List
offtopic but some people think OSRC a scam, all still just in 3D, nothing real yet, not even source to check
Re: Re: New Features Wish List
Yep exact, a $5 sensor on a $85 board had better add major functionality... which I really don't think it would. At least not without an accompanying GPS.pmackenzie wrote:I would be worried that it would add cost, but no real value.
You can use some of these
http://www.dealextreme.com/p/super-mini ... -pack-4519
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: Re: New Features Wish List
hey i just was thinking that since the frsky hub is working and all that is it possible to set an alarm off the cell voltage off the flvs1 oled hub sensor? that would actually give warning if cells begin to unbalance
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Re: New Features Wish List
It's supposed to be in there! On the second telemetry menu (with the RSSI alarms) there is an option:
Volt Thres=0.00.
This is suppused to be the threshold that will trigger an alarm if any of the cells, measured by the oled senso,r drop below it. 0.00 turns it off. The individual cell voltages are displayed on the bottom of the 'GPS' telemetry screen.
I don't have one of these sensors, so I can't test the alarm properly.
Mike.
Volt Thres=0.00.
This is suppused to be the threshold that will trigger an alarm if any of the cells, measured by the oled senso,r drop below it. 0.00 turns it off. The individual cell voltages are displayed on the bottom of the 'GPS' telemetry screen.
I don't have one of these sensors, so I can't test the alarm properly.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: Re: New Features Wish List
huh its not in the menu on r54 and i have everything hooked up it shows the cell voltages on the model telem screen (gps info screen) but no volt threshold menu item
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Re: New Features Wish List
OK, it may have gone missing, it's there on the version I'm running, which will be r56 when I commit it.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: Re: New Features Wish List
anything of major significance on 56?
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Re: New Features Wish List
Just checking, I'm working on er9x as well, can't remember whats changing where!
RPM - number of blades.
Filght pack mAh alarm, if you have a current sensor on the aircraft.
PPM pulse polarity working.
Bug in limits setting fixed.
The voltage threshold is added, it was in er9x, but got added after I took the sources for ersky9x.
most of these have just been added to er9x as well.
Mike.
RPM - number of blades.
Filght pack mAh alarm, if you have a current sensor on the aircraft.
PPM pulse polarity working.
Bug in limits setting fixed.
The voltage threshold is added, it was in er9x, but got added after I took the sources for ersky9x.
most of these have just been added to er9x as well.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: Re: New Features Wish List
mk cool theres supposedly a current sensor in the works for frsky telemetry but i dont know for sure
Re: New Features Wish List
Could it be posible to and sd memory stick for more memory like ram on the pc?
What goes up must come down
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Re: New Features Wish List
We have 256K flash for program, 48K RAM for data, 4Mbit (512Kbyte) of external EEPROM (flash), and we have provision for a (micro) SD card (several Gb likely), still implementing the software for that. Will that be sufficient for you?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Re: New Features Wish List
yes it will then will I be able to save all my model memory to SD card thanks for that can't wait for the mod
What goes up must come down
Re: Re: New Features Wish List
Hi all can you not put some exsternal RAM on the stok board so you have more memory available or a SD card for more memory
What goes up must come down
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Re: New Features Wish List
Maybe to be able to assign telemetry screens to toggle switches to quickly view desired screens. Actually, assign any two screens or 3 if assigned to 3 pos switch. Another idea is to lock the -and+ selection buttons if toggles are used. I find that when hand launching with my right hand and gripping the tx with my left my left palm will hit the left selection buttons and change my screens forcing me to look down and reselct screens after launching. I don't use a tx strap.
SM
SM
- JEANALTAYR
- Posts: 103
- Joined: Thu Dec 29, 2011 4:53 pm
- Country: -
- Location: Gd Toulouse FRANCE
Re: Re: New Features Wish List
hello
Could it be posible to drive a chanel with results of telemetry
ex extend flaps & gears with low speed or modify pitch propeller with rpm or courant
jmi
Could it be posible to drive a chanel with results of telemetry
ex extend flaps & gears with low speed or modify pitch propeller with rpm or courant
jmi
-
- Posts: 3
- Joined: Wed Jan 04, 2012 10:16 pm
- Country: -
Re: Re: New Features Wish List
How about a nice inexpensive color touch screen?
http://www.ebay.com/itm/200566071216?ss ... 1423.l2649
3.5" 320x480
Darn - even the 4.3" aren't that pricey
http://www.ebay.com/itm/200566071216?ss ... 1423.l2649
3.5" 320x480
Darn - even the 4.3" aren't that pricey
- Crashj007
- Posts: 133
- Joined: Tue Jan 31, 2012 11:44 pm
- Country: -
- Location: Raleigh, NC, USA
- Contact:
Re: Re: New Features Wish List
JEANALTAYR, at what point does it cease to be a radio controlled airplane and become an autonomous robot?
"9R2D2X"
"9R2D2X"
--
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744
- JEANALTAYR
- Posts: 103
- Joined: Thu Dec 29, 2011 4:53 pm
- Country: -
- Location: Gd Toulouse FRANCE
Re: Re: New Features Wish List
why not
use not mandatory
jmi
use not mandatory
jmi
Re: Re: New Features Wish List
I like that. When my plane slows down to 30 mph, the flaps deploy. Thats pretty cool really.JEANALTAYR wrote:hello
Could it be posible to drive a chanel with results of telemetry
ex extend flaps & gears with low speed or modify pitch propeller with rpm or courant
jmi
- Hexperience
- Posts: 190
- Joined: Fri Feb 17, 2012 4:48 pm
- Country: -
- Location: Keswick, Ont. Canada
Re: Re: New Features Wish List
Lots of cool things could happen based on telemetry;
-Turn on landing lights when battery gets low
-Lower throttle by %x when getting close to the RSSI limit giving you time to turn around OR some other failsafe
-position based events based on gps... i.e. when you are more than 100 feet away, turn off the sound system (if you had one) to save battery and not wake up the neibors.
All you would really need to do is have the various telemetry values as inputs for custom switches, then use the switch in a mix...
-Turn on landing lights when battery gets low
-Lower throttle by %x when getting close to the RSSI limit giving you time to turn around OR some other failsafe
-position based events based on gps... i.e. when you are more than 100 feet away, turn off the sound system (if you had one) to save battery and not wake up the neibors.
All you would really need to do is have the various telemetry values as inputs for custom switches, then use the switch in a mix...
Sky9X: One radio to rule them all, and in the darkness BIND them.