I would like to continue with some cool telemetry screens to show what could be possible with those scripts
I will first ask Martin for some artwork
Bertrand
Bertrand, flaperons are only possible when the ailerons are in different channels. You have the options "YES" and "YES, 2 CHANNELS" You always need two channels for flaperons. Maybe you meant flaps (separate from ailerons)? and then 1 or 2 channels?
The wizard looks great. If people don't understand it this time, they should not be doing RC..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
I promised to help out with some pages, but had other engagements over the weekend. Is there any page in particular you want me to do, or have you done them all?
Flaps/flaperons are complicated.
Often you have less up than down travel for flaperons.
I would perhaps ask how many servos the wing has.
Then how many are ailerons (outer surfaces) if number is two ask if they share a channel.
Then ask how many flaps. (inner surfaces) so far they only move down.
Then global questions like snapflaps and flaperons? if flaperons selected determine how much up movement is possible.
dvogonen wrote:I promised to help out with some pages, but had other engagements over the weekend. Is there any page in particular you want me to do, or have you done them all?
Skickat från min SM-N9005 via Tapatalk
An easy one, delta?
Martin already did the artwork which is in wizard/images
sorry I barfed out my ideas a bit too quickly. I thought about it a bit more.
For full house glider awesomeness I would ask this script: (please discuss)
How Flaps servos does the plane have? (0, 1, 2.)
How many aileron servos?
If odd number, use one for channel sharing.
Weigh them in pairs from the outside in.
If flaps where selected, ask if they should move with the ailerons?
Weigh in pairs, outside in. Consider that they might travel far less up than down or not at all.
Ask if snap-flaps should be set-up. Offer Flaps only or Flaps and Ailerons.
Landing mode set-up. (If requested)
Breaking options: Flaps, Crow, Reflex and Camber. Flaps and Crow only if flaps where set-up.
Break source, (switch position, 3-pos switch, proportional input (throttle or pot)
Elevator compensation weight.
I haven't set up my Taranis to run 2.0 yet. But I would be interested to code some input functions and mixer logic for those functions.
Not enough memory means that the RAM (not the EEPROM) is full! This will be the limit with Lua scripts and that's why I had to cut the wizard in parts (one part per model type). The limit for one file is around 20kBytes, which is big enough for what we need. I will have a look later today, but I think you don't have the latest version, because the Delta bug you are reporting is already fixed!