OpenTX - Nightly builds for pre-2.0 testing
Re: OpenTX - Nightly builds for pre-2.0 testing
make PCB=TARANIS TRANSLATIONS=FR HELI=NO.
The others are now defined by default in the makefile (see around line 640 for next).
The others are now defined by default in the makefile (see around line 640 for next).
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
Pourquoi "in companion" ?
Re: OpenTX - Nightly builds for pre-2.0 testing
Ok, thanks.Kilrah wrote:make PCB=TARANIS TRANSLATIONS=FR HELI=NO.
The others are now defined by default in the makefile (see around line 640 for next).
Just so I can compare the size of the firmware that I compile with the one downloaded, and with the same build options.bertrand35 wrote:Pourquoi "in companion" ?
download/file.php?mode=view&id=8021
Tchao
- mizuta1951
- Posts: 17
- Joined: Tue Jun 25, 2013 2:24 am
- Country: Japan
Re: OpenTX - Nightly builds for pre-2.0 testing
Can't find Nightly-Builds after 20-May.
Some thing wrong on my PC?
Some thing wrong on my PC?
Re: OpenTX - Nightly builds for pre-2.0 testing
Downlaod companion in below link & download firmware through companion.mizuta1951 wrote:Can't find Nightly-Builds after 20-May.
Some thing wrong on my PC?
New Companion is here: http://downloads-20.open-tx.org/companion/
Free! For Endless World.
- mizuta1951
- Posts: 17
- Joined: Tue Jun 25, 2013 2:24 am
- Country: Japan
Re: OpenTX - Nightly builds for pre-2.0 testing
Others have indicated to me that noticed the special menu funcion the voice file names only 8 characters handles in FW .
Over eight character file name can not play it.
Over eight character file name can not play it.
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: OpenTX - Nightly builds for pre-2.0 testing
Yes it is one of the changes.
Re: OpenTX - Nightly builds for pre-2.0 testing
Thanks! It works. But I can't find lua model script page in firmware.bertrand35 wrote:I just added the haptic option for Taranis to the compilation server, would you check for me that it works? Thanks!
Free! For Endless World.
Re: OpenTX - Nightly builds for pre-2.0 testing
^^me too. It was there in the last nightly but gone in official 1.99.1
Re: OpenTX - Nightly builds for pre-2.0 testing
Hi,
Could you tell me what you get with the last commits ?
I've found that the equivalent options for fr, noheli and notemplates in Companion was make PCB=TARANIS GVARS=YES TRANSLATIONS=FR and my last build with these parameters weighted 252020 bytes (23.05.2014 17H54).Kilrah wrote:make PCB=TARANIS TRANSLATIONS=FR HELI=NO.
The others are now defined by default in the makefile (see around line 640 for next).
Could you tell me what you get with the last commits ?
- guttedgeek
- Posts: 7
- Joined: Wed Feb 19, 2014 10:52 pm
- Country: -
Haptic doesn't honor repeat in special functions
*** Ignore this post. All works fine when programmed on the radio. It's when setup using companion that the the repeat interval doesn't get set right.
Noticed an issue with Haptic & Special Functions. Running 1.99.1 (21-05-2014).
When setting a repeat interval on Haptic (eg 5s), it only "plays" once (ie, it doesn't repeat).
Also curious to understand what the different numbers after "Haptic" in SFs do? I assumed a different vibration pattern but they all feel the same.
Noticed an issue with Haptic & Special Functions. Running 1.99.1 (21-05-2014).
When setting a repeat interval on Haptic (eg 5s), it only "plays" once (ie, it doesn't repeat).
Also curious to understand what the different numbers after "Haptic" in SFs do? I assumed a different vibration pattern but they all feel the same.
Re: OpenTX - Nightly builds for pre-2.0 testing
This is not working for me for some reason..I have Companion 1.99.1 installed and when I use it to download a firmware it brings me opentx-taranis-en.bin and after flashing it to the radio I have on the radio screen: Firmware 1.99.1 BUT no Haptic feedback option in the radio General settings neither it works.azure93 wrote:Download companion in below link & download firmware through companion.mizuta1951 wrote:Can't find Nightly-Builds after 20-May.
Some thing wrong on my PC?
New Companion is here: http://downloads-20.open-tx.org/companion/
IF I manually flash the radio with the latest Nightly available which is 5.20.14, than the radio screen shows Firmware 1.99 (note the missing .1) BUT the Haptic option is present in General Options and haptic works!
Re: OpenTX - Nightly builds for pre-2.0 testing
You need to tick the "haptic" box in the firmware options in companion before downloading, you'll then get opentx-taranis-haptic-en.bin and have the functionality. It is not included by default as it only makes sense if you installed the haptic module.
Re: OpenTX - Nightly builds for pre-2.0 testing
Thank you Kilrah, it makes sense
I was totally absorbed with the haptic idea that I was thinking it as default and not the opposite, I forgot not everyone would be going for it.
You guys are doing an outstanding work, thank you again!
I was totally absorbed with the haptic idea that I was thinking it as default and not the opposite, I forgot not everyone would be going for it.
You guys are doing an outstanding work, thank you again!
Re: OpenTX - Nightly builds for pre-2.0 testing
Guys I have an issue with telemetry and measured values using taranis 2940 & d8r-xp & sensor hub & gps & triaxis acceleration sensors.
Files here
http://www.rcgroups.com/forums/showpost ... count=3426
I think its a problem with opentx if not can someone enlighten me?
Thanks
Files here
http://www.rcgroups.com/forums/showpost ... count=3426
I think its a problem with opentx if not can someone enlighten me?
Thanks
If it has wings it will fly...
Re: OpenTX - Nightly builds for pre-2.0 testing
hi
i ve got vertion 1.99.1
FR 23/5 and haptic
the problem is that all the switches are not good
when al buton are up my taranis shows that the switches are in the midel
even in a new model
i ve got vertion 1.99.1
FR 23/5 and haptic
the problem is that all the switches are not good
when al buton are up my taranis shows that the switches are in the midel
even in a new model
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: OpenTX - Nightly builds for pre-2.0 testing
Not a clear message to me.
It seems to work fine for me in Companion simulators and on the transmitter(tx).
Clarify where you are operating. Companion model simulator, Companion tx simulator or on tx
It seems to work fine for me in Companion simulators and on the transmitter(tx).
Clarify where you are operating. Companion model simulator, Companion tx simulator or on tx
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: OpenTX - Nightly builds for pre-2.0 testing
when i thurn on my taranis al swithes were up and on the screen my taranis shows al in the midel
when i put them in the midel it shows up
and wen it is dawn it is dawn
switsh
sa up =>screen SA-
SA midel=> screen SA dawn
SA low=>screen SB up
....
Sh up=>screen SH dawn
sh dawn=> S11
i hope this helps
when i put them in the midel it shows up
and wen it is dawn it is dawn
switsh
sa up =>screen SA-
SA midel=> screen SA dawn
SA low=>screen SB up
....
Sh up=>screen SH dawn
sh dawn=> S11
i hope this helps
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: OpenTX - Nightly builds for pre-2.0 testing
Sorry, I can not duplicate on Taranis
Vers : 1.99.1
Date : 2014 -05-24
Time : 02:01:40
EEPR: 216
Vers : 1.99.1
Date : 2014 -05-24
Time : 02:01:40
EEPR: 216
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: OpenTX - Nightly builds for pre-2.0 testing
strang i have the latesd up date myn is
vers1.99.1
date 2014-05-23
time 13.30.06
eepr216
i gona put the en vertion
dit it
it is the vertion FRENCH vertion that has a problem
whit or whitout haptic
the en vertion is ok
vers1.99.1
date 2014-05-23
time 13.30.06
eepr216
i gona put the en vertion
dit it
it is the vertion FRENCH vertion that has a problem
whit or whitout haptic
the en vertion is ok
Re: OpenTX - Nightly builds for pre-2.0 testing
also wrong display of switch status in german firmware - vers.1.99.1
Re: OpenTX - Nightly builds for pre-2.0 testing
The 20th of May build has some problems with duration in logical switches. Look at https://github.com/opentx/opentx/issues/1122. You should try later builds.Endolf wrote:Hi
Just upgraded from the 5th of may build to the 20th of may build. I have a logical switch set up that is based off throttle being >-99 and my throttle hold switch not being in 'hold' position. I then have an edge switch based on this value becoming false that has a duration of 20 seconds. The idea was that I could carry on recording logs for 20 seconds after hitting throttle hold (think auto rotation on helis).
After I upgraded all my 'cell' logical switches became 'fuel' as did all my telemetry read outs. This was sort of expected as per the warning about the builds newer than 20th. However, what I can't seem to resolve is my edge switch with a duration. It just triggers and flicks off again, it not longer has the duration.
Is this a bug or has the functionality been moved to somewhere new?
Thanks
Endolf
projectkk2glider@github
Re: OpenTX - Nightly builds for pre-2.0 testing
Bin size varies (considerably) with the version and even build/system of compiler used, take a look at this comment https://github.com/opentx/opentx/pull/8 ... t-38349682davx wrote:Hi,I've found that the equivalent options for fr, noheli and notemplates in Companion was make PCB=TARANIS GVARS=YES TRANSLATIONS=FR and my last build with these parameters weighted 252020 bytes (23.05.2014 17H54).Kilrah wrote:make PCB=TARANIS TRANSLATIONS=FR HELI=NO.
The others are now defined by default in the makefile (see around line 640 for next).
Could you tell me what you get with the last commits ?
projectkk2glider@github
- MicheleVilla
- Posts: 66
- Joined: Thu Apr 10, 2014 4:13 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
Hi
I have just download last build of firmware
Opentx-Taranis-en.bin 26/05/2014 19:20
receiver XR8
The voltage of rx battery is everytime 1.70V
There is some change in parameter can I do?
I have just download last build of firmware
Opentx-Taranis-en.bin 26/05/2014 19:20
receiver XR8
The voltage of rx battery is everytime 1.70V
There is some change in parameter can I do?
Re: OpenTX - Nightly builds for pre-2.0 testing
Yes, I knew that the build size could be different depending on the compiler, that's why I wanted to make a direct comparison.dinamich wrote:
Bin size varies (considerably) with the version and even build/system of compiler used, take a look at this comment https://github.com/opentx/opentx/pull/8 ... t-38349682
I'm currently using the toolchain found in the Ubuntu repository: gcc-arm-none-eabi 4-8-2-14ubuntu1+6.
Thanks for the link, very interesting, I read that 4.8 version could be problematic so I'll be careful.
Tchao
Re: OpenTX - Nightly builds for pre-2.0 testing
Hy, boys ,
main Problem is, that if you have installed companion1.99.1
and you will donwload a firmware,
all old Firmwares from 21.05 to 24.05. with all the div. options is ready compiled and it has errors
at phy. switches, log. siwtches and no ON and no One at SF
This in all languages expect of english.
Software after 25.05. has not this switch errors,
but at SF no ON and no One in all languages expect of english.
Hope today when 1.99.2 will come all Firmware will new compiled to V1.99.2
But at SF no ON and no One in all languages expect of english.
At all language files line 432, 434. 436, at then end missing the Strings "ON\0" "One"
issues #1139
Helle
main Problem is, that if you have installed companion1.99.1
and you will donwload a firmware,
all old Firmwares from 21.05 to 24.05. with all the div. options is ready compiled and it has errors
at phy. switches, log. siwtches and no ON and no One at SF
This in all languages expect of english.
Software after 25.05. has not this switch errors,
but at SF no ON and no One in all languages expect of english.
Hope today when 1.99.2 will come all Firmware will new compiled to V1.99.2
But at SF no ON and no One in all languages expect of english.
At all language files line 432, 434. 436, at then end missing the Strings "ON\0" "One"
issues #1139
Helle
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
What was your range on A1 (before the update to 1.99.2) ?MicheleVilla wrote:Hi
I have just download last build of firmware
Opentx-Taranis-en.bin 26/05/2014 19:20
receiver XR8
The voltage of rx battery is everytime 1.70V
There is some change in parameter can I do?
- MicheleVilla
- Posts: 66
- Joined: Thu Apr 10, 2014 4:13 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
is 13.2V but on A1 there isn't any signal
when I connect battery appears on RX batt 1.70V
(in telemetry page)
when I connect battery appears on RX batt 1.70V
(in telemetry page)
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: OpenTX - Nightly builds for pre-2.0 testing
I am on this bug, it's an overflow. The spec doesn't say what is the unit, it doesn't help