I recently started rebuilding my quadcopter after buying a Walkera QR X350 body for it.
I also decided to buy an RC Timer APM 2.5 clone (Arduflyer 2.5.2).
I wanted to use an android app. on my phone via bluetooth but it seems like there's no provision for a direct bluetooth hookup from what I can find on the internag, maybe I missed something.
On my previous board (HK crius V1 clone) it was a simple plug and play setup..... almost... but for this Arduflyer board it seems I need 2 way telemetry modules, with the BT connected to the ground station module.
My question is this: I have Orange OpenLRS Tx/Rx here, set to 459mhz (to be UK legal) - could I enable telemetry on those and connect the Rx module serial port to the telemetry port on the board; then connect the bluetooth to the Tx module serial port?
Seems like a long way for a shortcut given as I want it simply to avoid using the USB port for minor setting changes on the ground (see ; mucking about trying to get something working).
Assuming this is how it's done and can be done with OpenLRS, then are there any good threads/hints/tips for doing it this way? I would like to use the follow me mode too.
All advice and help is appreciated and I'm new to using telemetry so treat as dummy
![Wink ;)](./images/smilies/icon_e_wink.gif)