new usbasp ,10 pin not 6 , can i
new usbasp ,10 pin not 6 , can i
can i make a 10 pin usbasp suit my 6 pin 9xr , i have the 6 pin cABLE from my hk usbasp ,can i push it into the 10 pin
Re: new usbasp ,10 pin not 6 , can i
no. see your other post for solutions to your problem
Re: new usbasp ,10 pin not 6 , can i
Thanks mate. . Yeah I read your response. , I have ordered some adapters from different suppliers out china , it's a shame the original hk unit was a dud , I have learnt to set up the 9xr so it's not so urgent anymore
Re: new usbasp ,10 pin not 6 , can i
good..I have learnt to set up the 9xr so it's not so urgent anymore
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: new usbasp ,10 pin not 6 , can i
Hi All.
I have soldered directly to the PCB from the 6 strand ribbon cable.
However I may have got it wrong.
Does any body which pin is which on the PCB, there are 3 on top and 3 on the bootom.
If I knew which was which i could doule check they were correct, going through the connector just confuses things.
I have soldered directly to the PCB from the 6 strand ribbon cable.
However I may have got it wrong.
Does any body which pin is which on the PCB, there are 3 on top and 3 on the bootom.
If I knew which was which i could doule check they were correct, going through the connector just confuses things.