Smart Port Voltage Sensor
Smart Port Voltage Sensor
I got my Smart port voltage sensor today..Plugged it in and I am fairly sure it is working, problem is I cannot find some kind of write up on haw to use it in the Taranis....Any help or info appreciated...
Re: Smart Port Voltage Sensor
What do you mean by 'use'?
You should see the values in the telemetry screen on the main screen. (Long press some key. I forgot which)
Perhaps you need to select the voltage source first in the telemetry screen of the model setup. And you should select the right threshold voltages for your battery.
But 'use' could mean to do stuff with the values. Like read the out on by voice function. Check out custom functions.
Written on my mobile. Please excuse my brevity.
You should see the values in the telemetry screen on the main screen. (Long press some key. I forgot which)
Perhaps you need to select the voltage source first in the telemetry screen of the model setup. And you should select the right threshold voltages for your battery.
But 'use' could mean to do stuff with the values. Like read the out on by voice function. Check out custom functions.
Written on my mobile. Please excuse my brevity.
Re: Smart Port Voltage Sensor
tilmanb wrote:What do you mean by 'use'?
You should see the values in the telemetry screen on the main screen. (Long press some key. I forgot which)
Perhaps you need to select the voltage source first in the telemetry screen of the model setup. And you should select the right threshold voltages for your battery.
But 'use' could mean to do stuff with the values. Like read the out on by voice function. Check out custom functions.
Written on my mobile. Please excuse my brevity.
By use, yes I mean I would like to know how set up a read out (voice) when voltage per cell gets to a certain point, and the same for RSSI. From what I have seen so far I get a reading for F1..Cell voltage and pack voltage. Not a teckie so have been looking for some kind of beginners guide to understand the SBus system. Sounds like a good way to get rid of some of the wires and make things more efficient.
Re: Smart Port Voltage Sensor
You get low battery warnings out of the box. For everything else use the voice readout custom function to play a value. The easiest trigger is a button like the trainer switch.
Or a logic expression like value falling below a certain threshold or timer. (Previous tab.)
Written on my mobile. Please excuse my brevity.
Or a logic expression like value falling below a certain threshold or timer. (Previous tab.)
Written on my mobile. Please excuse my brevity.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Smart Port Voltage Sensor
You can also on the 'telemetry' screen fast values to display on screen.
Sent from my GT-I9300 using Tapatalk
Sent from my GT-I9300 using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Smart Port Voltage Sensor
You have to set these up on a switch???tilmanb wrote:You get low battery warnings out of the box. For everything else use the voice readout custom function to play a value. The easiest trigger is a button like the trainer switch.
Or a logic expression like value falling below a certain threshold or timer. (Previous tab.)
Written on my mobile. Please excuse my brevity.
Re: Smart Port Voltage Sensor
Explain please or give me a place to read about this...Rob Thomson wrote:You can also on the 'telemetry' screen fast values to display on screen.
Sent from my GT-I9300 using Tapatalk
Re: Smart Port Voltage Sensor
Hy,
select at Telemetrie setting cell and cells
will show then your with Page long your akku
Helle
select at Telemetrie setting cell and cells
will show then your with Page long your akku
Helle
Re: Smart Port Voltage Sensor
Did you read the manual?cervri wrote:Explain please or give me a place to read about this...
http://www.open-tx.org/2013/08/22/opent ... manual-en/
Once you're done with telemetry and audio, read the "A few interaction examples" chapter.
Re: Smart Port Voltage Sensor
Yes, I have read the above materials thank you for the help..I'll look else where.Kilrah wrote:Did you read the manual?cervri wrote:Explain please or give me a place to read about this...
http://www.open-tx.org/2013/08/22/opent ... manual-en/
Once you're done with telemetry and audio, read the "A few interaction examples" chapter.