So my question is what is the selection of channels on the slave for.
![Confused :?](./images/smilies/icon_e_confused.gif)
Channel 5 has the same three mixes as channel 8 except for the switch used.Kilrah wrote:What do you have in the mixer on channel 5 on the slave radio?
Oh when I selected slave I said 8 channels and the rest as defaulted.Kilrah wrote:I'm out of ideas. What radios do you have (you didn't say if that was 2 Taranis or if there was a 9x or else), and what firmware version is each of them running?
I have loaded my eeprom file. I use the same on both radios. Model 19 is the master PPM5 test model. Model 23 is the slave model.Kilrah wrote:I don't understand. There is no way I can reproduce the problem.
Helle's problem is due to companion having a bug, but it only affects the 9X with particular options, Taranis should be OK. If you do everything on the radio and don't use companion it should be OK.
Can you post the EEPROM of both radios here when it doesn't work?
I'll load them in my 2 radios to have the exact same setup. Please mention the options you've selected for your firmware in companion.