Audio (voice) - Stock 9X PCB
Re: Audio (voice) - Stock 9X PCB
Hey guys, will any of you be willing to make a video or post pictures of how the voice mod is done for us non-electronic guys to follow? How much does this mod cost?
Re: Audio (voice) - Stock 9X PCB
http://www.rc-miskolc.emiter.hu/rc-misk ... Itemid=150
$39 Gets you the board...
$39 Gets you the board...
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
so all I need is that board, the speaker, erx9 and Im good to go?
Re: Audio (voice) - Stock 9X PCB
Yes if you can do some soldering.
You will need to solder some wires to the LCD vias, power and Gnd.
Joao
Sent from my GT-I9195 using Tapatalk
You will need to solder some wires to the LCD vias, power and Gnd.
Joao
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
take a look at SmartieParts Board…
its an easier way to be able to modify your radio and add firmware on it (i.e. ER9X)
then it will expose some cleaner pins for you to solder on as well.
its an easier way to be able to modify your radio and add firmware on it (i.e. ER9X)
then it will expose some cleaner pins for you to solder on as well.
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
I already have er9x on my radio, one question, why do we need the backlight wires?
Re: Audio (voice) - Stock 9X PCB
Hi volumax,
I will do everything I can to help you out here… its my way of giving back to the community.
Lets start with what have you done to your radio?
The assumption is you have a T9X, not a 9XR and you have done some modification to it as you have ER9x on it?
Can you explain what you have done to the radio thus far?
This would be a good basis for where we are at and what needs to be done.
Thanks.
I will do everything I can to help you out here… its my way of giving back to the community.
Lets start with what have you done to your radio?
The assumption is you have a T9X, not a 9XR and you have done some modification to it as you have ER9x on it?
Can you explain what you have done to the radio thus far?
This would be a good basis for where we are at and what needs to be done.
Thanks.
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
The backlight will now be controlled by the voice board. Pin 17 is now needed for something else.
Sent from my GT-I9195 using Tapatalk
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
LTMNO wrote:Hi volumax,
I will do everything I can to help you out here… its my way of giving back to the community.
Lets start with what have you done to your radio?
The assumption is you have a T9X, not a 9XR and you have done some modification to it as you have ER9x on it?
Can you explain what you have done to the radio thus far?
This would be a good basis for where we are at and what needs to be done.
Thanks.
Thanks a lot, I appreciate your initiative to help me, I have a T9X, I have only added an HK backlight and soldered ribbon cable to flash with er9x. Last night I bought the speaker because I want to see if it will actually fit with my 2x5 header being up under the little Turnigy rectangle, I didnt want to pop a hole on the bottom like many do. I now have to replace my gimbals since my aileron pot almost made me crash last weekend but since I dont have a esky9x board I havent pulled the trigger on aurora gimbals, also waiting for news from Alofthobbies, I was told by them that today they would be adding the taranis gimbals to their site, might get those as replacement.
Re: Audio (voice) - Stock 9X PCB
Hello volumax, this is good news.. you have soldered before and successfully mod'd your radio to update the firmware on it.
That means that you can successfully install the MegaSound9x board.
I would go ahead and order it if you haven't already done so and if I am not mistake, it comes with the 8ohms speaker and all the wiring? Nonetheless, you have ribbon cable and a speaker already from the sounds of it.
When you get that Sound Board, follow the instructions on the website, they are very clear. If you should have any questions while doing so, stop, ask and then continue. You can ping me directly via PM and we can do a chat session to step thru it. I assure you that you have done the hardest work already. Track down a dremel tool of sorts so you can expose some jacks/leads outside the case for easy access.
Just think, we had to build the boards ourselves first before our Hungarian Friend (http://www.rc-miskolc.emiter.hu) was suppling them to the masses.
That means that you can successfully install the MegaSound9x board.
I would go ahead and order it if you haven't already done so and if I am not mistake, it comes with the 8ohms speaker and all the wiring? Nonetheless, you have ribbon cable and a speaker already from the sounds of it.
When you get that Sound Board, follow the instructions on the website, they are very clear. If you should have any questions while doing so, stop, ask and then continue. You can ping me directly via PM and we can do a chat session to step thru it. I assure you that you have done the hardest work already. Track down a dremel tool of sorts so you can expose some jacks/leads outside the case for easy access.
Just think, we had to build the boards ourselves first before our Hungarian Friend (http://www.rc-miskolc.emiter.hu) was suppling them to the masses.
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
Pino, that one gave you some grey hairs, remember?
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
you can say that again…. is why I am saying that we/everyone is so fortunate now that there is a board to buy.
why did you remind me… lol
why did you remind me… lol
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
You know what? I would build one any minute again. I had so much fun building both my voice boards.
Sent from my GT-I9195 using Tapatalk
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Ah, and the first one on strip board too..
Sent from my GT-I9195 using Tapatalk
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
lol, did you get a new smartphone?
good on ya…
okay, back to work…
Just so this post is ligit, I did order the MegaSound9x Board on the 12th of Nov. It arrived in Canada on the 18th and now is being processed by customs… hopefully I will see it soon.
That and a new barebones T9x and a new Taranis were ordered too last week… I am so weak.
good on ya…
okay, back to work…
Just so this post is ligit, I did order the MegaSound9x Board on the 12th of Nov. It arrived in Canada on the 18th and now is being processed by customs… hopefully I will see it soon.
That and a new barebones T9x and a new Taranis were ordered too last week… I am so weak.
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
hey LTMNO, do you also have telemetry on your t9x?
Re: Audio (voice) - Stock 9X PCB
Is there another way?
http://openrcforums.com/forum/viewtopic ... 150#p63669
http://openrcforums.com/forum/viewtopic ... 150#p63669
jhsa wrote:Ah, and the first one on strip board too..
Sent from my GT-I9195 using Tapatalk
Re: Audio (voice) - Stock 9X PCB
he he. I build all my projects on strip board. Don't want to mess with chemicals at the moment because of my son..
João
Sent from my GT-I9195 using Tapatalk
João
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Hello. That is affirmative via Telemetrez and SP Board.volumax wrote:hey LTMNO, do you also have telemetry on your t9x?
Custom 9x with M64/Telemetry Mod
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Audio (voice) - Stock 9X PCB
Hey guys,
just in case someone has the same problems:
Last night I finished the implementation of the megasound 9x and had an issue with flashing the board.
I used the method with USBASP and the files in AVR.ZIP from the megasound homepage.
To make it work I had to exchange the signatures of Atmega328P and Atmega328 in the avrdude.conf!
just in case someone has the same problems:
Last night I finished the implementation of the megasound 9x and had an issue with flashing the board.
I used the method with USBASP and the files in AVR.ZIP from the megasound homepage.
To make it work I had to exchange the signatures of Atmega328P and Atmega328 in the avrdude.conf!
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: Audio (voice) - Stock 9X PCB
Would like to emphasize (for the umpteenth time) that anyone who uses my sound card, you do not need to upload the FW!
The cards are programmed up (with the lates FW)!
This many people misunderstand.
Ready to use.
The cards are programmed up (with the lates FW)!
This many people misunderstand.
Ready to use.
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Audio (voice) - Stock 9X PCB
Yes, and it includes a bootloader so the application update may be done over the serial connection.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: Audio (voice) - Stock 9X PCB
I just was aware of that fact, but I couldn't establish a working serial connection. Don't know why.
After flashing the FW ev'rything went OK.
After flashing the FW ev'rything went OK.
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
Re: Audio (voice) - Stock 9X PCB
So when I use the sound card, my backlight will now work with er9x? As in, will it turn off after 10 seconds if I set it to that?
Re: Audio (voice) - Stock 9X PCB
will now work*
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Audio (voice) - Stock 9X PCB
As long as the backlight is wired to the sound card then yes.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Audio (voice) - Stock 9X PCB
Thanks, I pretty much have the idea of everything I have to do except the backlight, I have already the backlight installed directly, how do I do it through the sound card so I can get it working with er9x?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Audio (voice) - Stock 9X PCB
The MegaSound board includes the driver transistor and current limiting resistor. All you need to do is connect the backlight to BL+ and BL-.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Audio (voice) - Stock 9X PCB
Oh ok so I simply cut off the adapter and use the red and black wires from the backlight? And connect the lcd back to its original connection?
Re: Audio (voice) - Stock 9X PCB
the red and black wires, yes..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW