What you will find in gruvin9x (which is not in er9x)?
- a full flight phases feature (6 chars phases names, with smooth transitions between phases)
- expos algorithm is rewriten (you may use more than 2 switches)
- MODELS / MIXERS screens redesigned to allow to exit a copy or move operation and revert to the previous state
- in MIXERS screen, it's possible to insert a MIX before and after a line
- An "extended trims" feature, which allows us to go over [-125:125] (useful for maiden flight ; the trim does blink in this case, meaning that there is a mechanical problem to solve)
- A new Function Switches screen for assigning per model special functions (move trims to offsets, instant trim, trainer) to switches
- Full FrSky telemetry support including FrSky hub
- winged Shadow How High telemetry support [New]
- Virtual channels (CH9-CH16) displayed as bars on an alternate screen [New]
- Many little things and optimizations that I don't have on the top of my head
- Better EEPROM compression algorithm
- EEPROM operations are asynchronous. With a small icon on the screen to indicate that the firmware is currently writing (better not to switch off at this moment).
What you will not find in gruvin9x (which is in er9x)?
- the owner name
- the audio options
- flight pack capacity used if analog A1 or A2 has current measurement
- telemetry voltage measurement up to 51.1V.
- altitude in metric/imperial units if FrSky hub altitude sensor used
Firmware differences between gruvin9x and er9x (stock board)
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Firmware differences between gruvin9x and er9x (stock board)
Last edited by bertrand35 on Sat Jan 07, 2012 8:15 pm, edited 8 times in total.
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Firmware differences between gruvin9x and er9x (stock bo
Reserved. Feel free to refresh my memory about what is and what is not in the firmware.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Firmware differences between gruvin9x and er9x (stock board)
Usefull info here . Thanks for adding.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Firmware differences between gruvin9x and er9x (stock board)
Would you like me to port the audio class to your code base? Should be an easy job!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Firmware differences between gruvin9x and er9x (stock bo
Do you know how much flash it will use?
Bertrand.
Bertrand.
- MikeB
- 9x Developer
- Posts: 17994
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Firmware differences between gruvin9x and er9x (stock bo
Does gruvin9x have?:
Bandgap to allow more accurate low voltage measurement.
Winged Shadow How High telemetry support.
Flight pack capacity used if analog A1 or A2 has current measurement.
Telemetry voltage measurement up to 51.1V.
Altitude in metric/imperial units if FrSky hub altitude sensor used.
Mike.
Bandgap to allow more accurate low voltage measurement.
Winged Shadow How High telemetry support.
Flight pack capacity used if analog A1 or A2 has current measurement.
Telemetry voltage measurement up to 51.1V.
Altitude in metric/imperial units if FrSky hub altitude sensor used.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Firmware differences between gruvin9x and er9x (stock bo
List updated with these items, thanks So the 2 first items are implemented. The others are not.MikeB wrote:Does gruvin9x have?:
Bandgap to allow more accurate low voltage measurement.
Winged Shadow How High telemetry support.
Flight pack capacity used if analog A1 or A2 has current measurement.
Telemetry voltage measurement up to 51.1V.
Altitude in metric/imperial units if FrSky hub altitude sensor used.
Mike.
Bertrand.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Firmware differences between gruvin9x and er9x (stock bo
Overall.. I believe about 1.4 - 1.5kbertrand35 wrote:Do you know how much flash it will use?
Bertrand.
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Firmware differences between gruvin9x and er9x (stock bo
I want to know which one will talk to meMikeB wrote:Does gruvin9x have?:
Bandgap to allow more accurate low voltage measurement.
Winged Shadow How High telemetry support.
Flight pack capacity used if analog A1 or A2 has current measurement.
Telemetry voltage measurement up to 51.1V.
Altitude in metric/imperial units if FrSky hub altitude sensor used.
Mike.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW