help ?? flash 9xr to 9x
help ?? flash 9xr to 9x
Can someone please help me reflash my 9xr to standard th9x operating system , i have the cable but i am yet to find a driver for my windows vista 32 bit. i have companionx downloaded but obviously no driver to talk to my transmitter .. i am bamboozled , its a great radio but its so hard to set up ,and the original 9x was so easy to set up .. why make it harder ,i only have helis and the 9x was so simple to learn , i have been trying to figure out the 9xr for weeks but i am no closer to figuring it out , i just want to flash it to 9x, there must be a way ,i followed a wiki tutorial for flashing the 9x to er9x to try and get it working , but the driver does not seem to be installing ,tried adding usb etc but it just wont find the tx ,. i have the usbasb i think its called i got it from hk when i got the tx. please help me step by step . driver to flash etc .. PLEASE
Josh
Josh
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: help ?? flash 9xr to 9x
By the original 9X do you mean the stock firmware that the 9X came with?
The 9XR comes with a version of er9x. This is actually much better than the original stock firmware of the 9X. Once you understand how er9x is working it is quite easy.
Ask a few more questions relating to what you are trying to achieve with setting up er9x, there's plenty of help available here.
Mike.
The 9XR comes with a version of er9x. This is actually much better than the original stock firmware of the 9X. Once you understand how er9x is working it is quite easy.
Ask a few more questions relating to what you are trying to achieve with setting up er9x, there's plenty of help available here.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: help ?? flash 9xr to 9x
Have a watch of the videos. (Link on the right)
They are usefully
Sent from my GT-I9300 using Tapatalk 2
They are usefully
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: help ?? flash 9xr to 9x
If you got your usbasp recently from HK, they had a bad batch. It concerns the 'new' usbasp that they sell. The easy way to tell is: does your cable have a 6 pin and 10 pin connector at one end , or just the 6 pin at one end? the old one had the 6 and 10 pin at one end. See the comments on the 'old' version for more information.josuahj wrote: i have the usbasb i think its called i got it from hk when i got the tx. please help me step by step . driver to flash etc .. PLEASE
Josh
http://www.hobbyking.com/hobbyking/stor ... ssors.html
the bottom line is, if you have one of these new defective units, it isnt going to work unless you have another usbasp or arduino to flash it. Sorta a chicken and an egg syndrome
Re: help ?? flash 9xr to 9x
no its only a usb on one end and a 6 pin on the othe other, its got the er9x , i want to put the standard th9x , er9x its toooooo hard to figure out ,i have been trying for weeks and got nowhere
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: help ?? flash 9xr to 9x
I would still say give er9x one more go. Ask here for specific help. It does have a different approach to setting up models to 'commercial' radios, but that is part of why it is so much more powerful. You aren't the first to have problems, but getting a few questions answered can lead to you understanding what is happening.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: help ?? flash 9xr to 9x
Your right about trying to figure it out , I would not be flying Helis if I gave up trying , the stuff I have learnt amazes me . It's all about learning from scratch forums and utube etc ... Is the standard 9xr os different from er9x , does it have the mix menu
Re: help ?? flash 9xr to 9x
The standard 9XR firmware IS er9x. Hobby King just changed a few minor things-
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: help ?? flash 9xr to 9x
Can anyone point me towards a driver specific to vista
Re: help ?? flash 9xr to 9x
Please reread my earlier post regarding defective usbasp's recently sold by HK. You may have one of them.
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: help ?? flash 9xr to 9x
There are some drivers here:
http://code.google.com/p/er9x/downloads/list
4th item from the top.
I skipped vista so I don't know if they do work.
Mike.
http://code.google.com/p/er9x/downloads/list
4th item from the top.
I skipped vista so I don't know if they do work.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: help ?? flash 9xr to 9x
This us my USBasp lead
Re: help ?? flash 9xr to 9x
well looking at the hk page it seems i may have the bad apple , the new type with only the 6pin is the rotten one ,
Re: help ?? flash 9xr to 9x
yes I'm afraid so. If it's never worked, no amount of trying different drivers is gonna make a difference. Sorry to bear bad news.
Re: help ?? flash 9xr to 9x
well one thing i found i can do is download other peoples setups and copy them step by step manually,
Re: help ?? flash 9xr to 9x
Give it a try, you will see that when you start to understand the logic of it, you won't want to go back to the buggy original 9x firmware.. but of course it is up to you
I changed my radio to er9x when I first got it and never looked back ever since.
João
I changed my radio to er9x when I first got it and never looked back ever since.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: help ?? flash 9xr to 9x
I have one of these HK usbasp with the six pin connector and I had to reprogram it using an arduino 'cause the original firmare was bad. Once reprogrammed worked flawlessly.
Re: help ?? flash 9xr to 9x
Just got new USBasp it's a 10 pin not 6 pin , now what
Re: help ?? flash 9xr to 9x
get a cable with both plugs on it
https://www.sparkfun.com/products/9215
buy an adapter. lots of places sell them
http://www.9xrprogrammer.com/index.php/ ... ng-adapter
Build your own adapter based on the pinouts
http://www.9xrprogrammer.com/index.php/ ... p-hardware
use these jumper wires. lots of places sell them
https://www.sparkfun.com/products/11710
use those wires to allow your 'new' usbasp to flash your 'bad' usbasp into working condition. then your good to go
lots of ways to work around the fact that you didnt order a usbasp with the right plug on it.
while your at it be sure you didnt get one with 220 ohm resistor packs .
http://openrcforums.com/forum/viewtopic.php?f=10&t=2490
good luck
https://www.sparkfun.com/products/9215
buy an adapter. lots of places sell them
http://www.9xrprogrammer.com/index.php/ ... ng-adapter
Build your own adapter based on the pinouts
http://www.9xrprogrammer.com/index.php/ ... p-hardware
use these jumper wires. lots of places sell them
https://www.sparkfun.com/products/11710
use those wires to allow your 'new' usbasp to flash your 'bad' usbasp into working condition. then your good to go
lots of ways to work around the fact that you didnt order a usbasp with the right plug on it.
while your at it be sure you didnt get one with 220 ohm resistor packs .
http://openrcforums.com/forum/viewtopic.php?f=10&t=2490
good luck