Audio (voice) - Stock 9X PCB
Re: Audio (voice) - Stock 9X PCB
Ahhh, yes, didn't read about the 00:00 somehow..
My radio does the same. Timer counts up on the screen but voice counts down starting at 255 minutes..
I guess it should count up starting the announcements at 1 minute..
João
@ReSt
I think the timer should be allowed to count up without a target value.. and the voice say it correctly..
Some people just want to know how long they flew. Gliders or people with IC powered aircraft.
On my club for example, if we fly IC powered aircraft, we must log the engine running time of every flight in a log book.
My radio does the same. Timer counts up on the screen but voice counts down starting at 255 minutes..
I guess it should count up starting the announcements at 1 minute..
João
@ReSt
I think the timer should be allowed to count up without a target value.. and the voice say it correctly..
Some people just want to know how long they flew. Gliders or people with IC powered aircraft.
On my club for example, if we fly IC powered aircraft, we must log the engine running time of every flight in a log book.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Audio (voice) - Stock 9X PCB
I can see why there is a problem. The timer implementation is odd. The actual timer always counts in one direction, then the value displayed/used is modified depending on the direction and set time. When we only had a minute beep, the actual value didn't matter, now, for voice, it does.
I've only ever actually used a down counter when flying. I'll get to this soon, but I have a chance to do some FLYING today.
Mike.
I've only ever actually used a down counter when flying. I'll get to this soon, but I have a chance to do some FLYING today.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Audio (voice) - Stock 9X PCB
Yeah, go for it Mike.. Have fun.. here the weather is c``p again today..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Audio (voice) - Stock 9X PCB
On the circuit as I designed it, there are THREE unused inputs (labelled X1, X2 and X3), on pins PC3, PC2 and PC1.
These could be used as extra switch inputs, if we can get the data to the M64.
Are these inputs easily connectable on the HC1969 Megasound board?
Mike.
These could be used as extra switch inputs, if we can get the data to the M64.
Are these inputs easily connectable on the HC1969 Megasound board?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Audio (voice) - Stock 9X PCB
I would say that another 3POS switch would be very welcome as well as another momentary on the other side/back of the radio..
Thanks Mike
João
Thanks Mike
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
My card is based on the HaGeHa card.MikeB wrote:On the circuit as I designed it, there are THREE unused inputs (labelled X1, X2 and X3), on pins PC3, PC2 and PC1.
These could be used as extra switch inputs, if we can get the data to the M64.
Are these inputs easily connectable on the HC1969 Megasound board?
Mike.
Does not appear in X1, X2 and X3 inputs.
These treats M328P the original program?
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: Audio (voice) - Stock 9X PCB
well, it looks like that everybody will have to do a little soldering if we want the extra switches
But if I remember the latest HaGeHa board has pads on those pins??
EDIT: Yes it does.. I just confirmed..
João
But if I remember the latest HaGeHa board has pads on those pins??
EDIT: Yes it does.. I just confirmed..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Where? Please show me this!jhsa wrote:well, it looks like that everybody will have to do a little soldering if we want the extra switches
But if I remember the latest HaGeHa board has pads on those pins??
EDIT: Yes it does.. I just confirmed..
João
http://amod328.googlecode.com/svn/hardw ... IC-DIL.pdf
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: Audio (voice) - Stock 9X PCB
Pins 24, 25 and 26..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Thanks!jhsa wrote:Pins 24, 25 and 26..
The diagram was not shown.
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: Audio (voice) - Stock 9X PCB
3 pins= 1pcs 3 way svitch + 1pcs 1way switch!
or
1pcs 7 way switch!
or
1pcs 7 way switch!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: Audio (voice) - Stock 9X PCB
Hello Gents, yes, 3 Pos Switch is always a blessing.jhsa wrote:I would say that another 3POS switch would be very welcome as well as another momentary on the other side/back of the radio..
Thanks Mike
João
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
AMEN BrotherLTMNO wrote: Hello Gents, yes, 3 Pos Switch is always a blessing.
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Thank you Mike,
This last update is working perfectly and have nice features!!!
This last update is working perfectly and have nice features!!!
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Audio (voice) - Stock 9X PCB
Is there a posted schematic of the megasound board?
Sent from my iPod touch using Tapatalk.
Sent from my iPod touch using Tapatalk.
Re: Audio (voice) - Stock 9X PCB
HC1969 wrote:My card is based on the HaGeHa card.
Re: Audio (voice) - Stock 9X PCB
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
The latest data from Feb.03.2013 are here:
http://openrcforums.com/forum/viewtopic ... start=3081
http://openrcforums.com/forum/viewtopic ... start=3081
Re: Audio (voice) - Stock 9X PCB
Hi All,
I build this wonderfull sound module into 9XR, here are some pictures.
Many thanks to all involved on its design !
I can share board layout (DIL/SMD0805) if any interest.
I build this wonderfull sound module into 9XR, here are some pictures.
Many thanks to all involved on its design !
I can share board layout (DIL/SMD0805) if any interest.
Re: Audio (voice) - Stock 9X PCB
hi mhotar,
what are the dimensions of the board?
The 5 volts stabilization is no longer available?
The motherboard 5V regulator is strong enough!
Hans
what are the dimensions of the board?
The 5 volts stabilization is no longer available?
The motherboard 5V regulator is strong enough!
Hans
Re: Audio (voice) - Stock 9X PCB
The 9xR has a stronger 5V regulator..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Dimensions are 33x43, there is 5V and 3.3V regulator on the board, 3.3V is hidden under blue cable on the pictures.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Audio (voice) - Stock 9X PCB
I've just allocated voice file 0059.WAV for the word "Watts".
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Audio (voice) - Stock 9X PCB
Hi Guys,
Soldering the wires to D0,D1,D2,D3 was not so bad after getting a good magnafier!
A sign of old age?? I am using the MegaSound board.
JHSA made me a file "hay darrell are you ready to fly". Thanks JHSA,, Am I correct that I read that I need to rename this file to 0028 to have it play when the radio is turned on?
What is a good program to use when you want to open and edit
a HEX or BIN file?
Thank You,
Wrongway
Soldering the wires to D0,D1,D2,D3 was not so bad after getting a good magnafier!
A sign of old age?? I am using the MegaSound board.
JHSA made me a file "hay darrell are you ready to fly". Thanks JHSA,, Am I correct that I read that I need to rename this file to 0028 to have it play when the radio is turned on?
What is a good program to use when you want to open and edit
a HEX or BIN file?
Thank You,
Wrongway
Re: Audio (voice) - Stock 9X PCB
If you use er9x, yes..Wrongway wrote:Am I correct that I read that I need to rename this file to 0028 to have it play when the radio is turned on?
I don't know if I undrstand what you mean hereWhat is a good program to use when you want to open and edit
a HEX or BIN file?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
Will update my sound files as soon as possible.. Shame that I can't update my own SD Card at the moment. The SD Card is under the board and I can't acess it. Board is hot glued to the case, so to update my card would have to remove the megasound9x board from the radio, which I'm not going to do after the work I had to fit all inMikeB wrote:I've just allocated voice file 0059.WAV for the word "Watts".
Mike.
My only option is to wait for the voice module to be able to comunicate to the PC over serial..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Audio (voice) - Stock 9X PCB
It's not really funny at all
Apologies João, my warped sense of humour!
Clive
Re: Audio (voice) - Stock 9X PCB
jhsa wrote:Will update my sound files as soon as possible.. Shame that I can't update my own SD Card at the moment. The SD Card is under the board and I can't acess it. Board is hot glued to the case, so to update my card would have to remove the megasound9x board from the radio, which I'm not going to do after the work I had to fit all inMikeB wrote:I've just allocated voice file 0059.WAV for the word "Watts".
Mike.
My only option is to wait for the voice module to be able to comunicate to the PC over serial..
João
Lol, me too. Hello Amigo.
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
BTW, Great job mho tar, that is some nice PCB'ing...
Custom 9x with M64/Telemetry Mod
Re: Audio (voice) - Stock 9X PCB
It would be good to have a centrally stored and updated, always up voice table because I'm not sure I follow the updates (and for me, there are things you need to put extra sounds in the blanks)!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!