Look I got a 9xr from HK with a M128 MCU'
Look I got a 9xr from HK with a M128 MCU'
I was having some issues flashing my new Turnigy 9xr. So I asked around for help and opened up the radio. Turns out there is a upgraded M128 MCU! That is a change from the 64 of previous models.
The radio was purchased on March 16, 2013.
The radio was purchased on March 16, 2013.
Re: Look I got a 9xr from HK with a M128 MCU'
Here are the best resolution close-ups I could get of the new processor. (These were shot with my phone a Galaxy SII)
Re: Look I got a 9xr from HK with a M128 MCU'
thanks for the post and the pictures.
I ordered a 9xr from HK on March 8th, with shipping on March 11th. Just checked and it only has the m64
I ordered a 9xr from HK on March 8th, with shipping on March 11th. Just checked and it only has the m64
Re: Look I got a 9xr from HK with a M128 MCU'
Hey yay, now they just have to make the telemetry mod as well And create more space for other mods inside the radio
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Look I got a 9xr from HK with a M128 MCU'
You can flash then the er9x128 or even opentx 128.. You can have the complete openTX inside the radio now.. and the double of the memory for models..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Look I got a 9xr from HK with a M128 MCU'
Where is the code to download for er9x128? (Not sure what is latest Stable Version)jhsa wrote:You can flash then the er9x128 or even opentx 128.. You can have the complete openTX inside the radio now.. and the double of the memory for models..
Re: Look I got a 9xr from HK with a M128 MCU'
9xr PCB is ready for telemetry mod, it needs only to place two components to different position ,move two vires inside connectors and some code change. They can surprise us.
Odesláno z mého Blade pomocí Tapatalk 2
Odesláno z mého Blade pomocí Tapatalk 2
Re: Look I got a 9xr from HK with a M128 MCU'
Go to preferences in eepe and change the processor to m128 and click download.. it will download the latest er9x128 version..rsoko wrote:
Where is the code to download for er9x128? (Not sure what is latest Stable Version)
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Look I got a 9xr from HK with a M128 MCU'
Thanks! That makes it easy.
Re: Look I got a 9xr from HK with a M128 MCU'
So HK have another version of "their" firmware for the 128 processor?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Look I got a 9xr from HK with a M128 MCU'
The version for the M64 actually loads into a M128 and runs OK. eepe might get confused though!
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Look I got a 9xr from HK with a M128 MCU'
Is this the one that needs to be downloaded: er9x 128 frysky?
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Look I got a 9xr from HK with a M128 MCU'
Yes, but it does expect the telemetry mods to be done. I only build that one as I had assumed it was only needed by people who needed the '128 because the FrSky version was getting close to the limit of available flash. I could add the standard version for the '128 if it is needed, just trying to minimise the number of varients needed.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Look I got a 9xr from HK with a M128 MCU'
Thanks for the response. That makes sense. Having a lot of extra does take up a lot of extra space.
Re: Look I got a 9xr from HK with a M128 MCU'
I guess HK finally figure out they won't sell too many 9XR unless they upgrade/change something. or the OEM worker just loaded a wrong roll of CPU when they made them (which happens not infrequently in factory). Would be interesting to see what is coming out from now on.
Re: Sv: Look I got a 9xr from HK with a M128 MCU'
Or even more likely:
The 64 chip version was temporarily unavailable and was replaced by the slightly more expensive, pin compatible, 128 version to be able to complete the production run. This is done all the time. Lots of circuits are compatible, but you generally want to use the cheapest (obviously).
If the change was intentional they would have updated the firmware to take advantage of the expanded memory. Is there room for more than 16 models?
The 64 chip version was temporarily unavailable and was replaced by the slightly more expensive, pin compatible, 128 version to be able to complete the production run. This is done all the time. Lots of circuits are compatible, but you generally want to use the cheapest (obviously).
If the change was intentional they would have updated the firmware to take advantage of the expanded memory. Is there room for more than 16 models?
Re: Look I got a 9xr from HK with a M128 MCU'
would they?
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Sv: Look I got a 9xr from HK with a M128 MCU'
If they wanted to claim an improvement they better update the firmware to use it.
The easiest way would be to use a newer version of openTX or er9x compiled for m128
The additions they made to er9x were purely cosmetic anyway, so there would be little reason to repeat them.
The easiest way would be to use a newer version of openTX or er9x compiled for m128
The additions they made to er9x were purely cosmetic anyway, so there would be little reason to repeat them.
Re: Look I got a 9xr from HK with a M128 MCU'
well, soon we will find out if that m128 was an improvement or not..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Look I got a 9xr from HK with a M128 MCU'
jhsa wrote:You can flash then the er9x128 or even opentx 128.. You can have the complete openTX inside the radio now.. and the double of the memory for models..
Could you explain this to me please? ATmega64 and ATmega128 have both 2kB of EEPROM, so why double the memory for models? Models' templates aren't stored exclusively in EEPROM?
Re: Look I got a 9xr from HK with a M128 MCU'
No, atmega128 has 4kB.
Re: Look I got a 9xr from HK with a M128 MCU'
That's a bit strange considering the 2nd page of this document.Kilrah wrote:No, atmega128 has 4kB.
http://www.atmel.com/Images/doc2539.pdf
Re: Look I got a 9xr from HK with a M128 MCU'
Well, apparently even atmel makes errors in their docs!
See datasheet instead. http://www.atmel.com/Images/2467S.pdf
I'm happily using the extra 2kB on my 9x with openTx
See datasheet instead. http://www.atmel.com/Images/2467S.pdf
I'm happily using the extra 2kB on my 9x with openTx
Re: Look I got a 9xr from HK with a M128 MCU'
me too. got 3.4 KB free on mine
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Look I got a 9xr from HK with a M128 MCU'
I bought my 9XR on March 28, 2013.There is a upgraded M128 MCU inside to. No problems with either gimbals or anything else. Works perfect for me.
Re: Look I got a 9xr from HK with a M128 MCU'
Now that is interesting.. I wonder if they are using the M128 software that gives you extra model storage....kippan wrote:I bought my 9XR on March 28, 2013.There is a upgraded M128 MCU inside to. No problems with either gimbals or anything else. Works perfect for me.
Can you tell us how many models the transmitter will allow you to store?
Re: Look I got a 9xr from HK with a M128 MCU'
Just look at the model select menu how much free space you have..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Look I got a 9xr from HK with a M128 MCU'
Hi,16 channels as standard.
-
- Posts: 11
- Joined: Sat Jan 05, 2013 10:43 am
- Country: -
Re: Look I got a 9xr from HK with a M128 MCU'
What needs to be done to use bigger memory of new chip?
I have received new radio with m128, uploaded newest er9x 788 version 128 but free model memory is still 1777.
When I read eeprom with eepe it shows 4KB but free bytes dont add up to used bytes.
How much free model memory do you get on yours?
I have received new radio with m128, uploaded newest er9x 788 version 128 but free model memory is still 1777.
When I read eeprom with eepe it shows 4KB but free bytes dont add up to used bytes.
How much free model memory do you get on yours?