FrSky officially X9D announcement
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
FrSky officially X9D announcement
FrSky now officially announced the new X9D transmitter . it is called ...
Taranis
... and it is powered by 'OPEN 9XD' - seems to be a modified openTX FW?!
Looks like the known JR-radios - very handy formfactor - and the 'tech-specs' sounds very well - I'm curious for the (street) price.
Best regards,
Michael
Taranis
... and it is powered by 'OPEN 9XD' - seems to be a modified openTX FW?!
Looks like the known JR-radios - very handy formfactor - and the 'tech-specs' sounds very well - I'm curious for the (street) price.
Best regards,
Michael
Last edited by TheFlyer on Tue Jul 16, 2013 8:44 pm, edited 3 times in total.
Re: FrSky officially X9D announcement
It's actually the main trunk of openTx, the logo was just updated this morning
Some of the early dev talk was here:
viewtopic.php?f=45&t=2174
Some of the early dev talk was here:
viewtopic.php?f=45&t=2174
Re: FrSky officially X9D announcement
Someone who is good with those things should write a article on diydrones.com
The UAV and multicopter people will lap it up I'm sure.
Transparent bidirectional high speed telemetry link, opensource firmware, long range radio option, receivers with digital sbus output, voice output would be my personal highlights for UAV like applications.
The UAV and multicopter people will lap it up I'm sure.
Transparent bidirectional high speed telemetry link, opensource firmware, long range radio option, receivers with digital sbus output, voice output would be my personal highlights for UAV like applications.
Re: FrSky officially X9D announcement
I piped those images (WTF web design!?) though a free online OCR. With mixed results.
Up to 16 channels
Four ball bearing gimbals
Two-module two-frequency system
one Internal module plus one external an module slot
Three selectable modes
D8 (8ch telemetry)
DI6(16ch full duplex telemetry)
LH12(12ch non-telemetry long range. up to 3 times further]
Super lower latency (approx. 1/3 of current systems) and higher precision
Receiver Match , RSSI (receiver signal strength)
Smart Part , Big backlit LCD (212X64), USB, SD Card
Audio speech outputs (values, alarms, settings, etc.)
Smart Port
Smart Port (S. Port) is a signal wire lull duplex digital transmission interface developed by FrSky
Electronic Co. Ltd. All products enabled with Smart Port (including XJT module. X8R receiver. new
hub-less sensors. new Smart Dashboard. etc). serial port user data and other user inputfoutput
devices can be connected without limitations for numbers or sequences at a high transmission
speed.
Receiver Match
Receiver Match otters that each transmitter program for a particular flight model is bound to one and only one
receiver, which prevents a user from flying his model while the transmitter is still programmed for it.
Up to 16 channels
Four ball bearing gimbals
Two-module two-frequency system
one Internal module plus one external an module slot
Three selectable modes
D8 (8ch telemetry)
DI6(16ch full duplex telemetry)
LH12(12ch non-telemetry long range. up to 3 times further]
Super lower latency (approx. 1/3 of current systems) and higher precision
Receiver Match , RSSI (receiver signal strength)
Smart Part , Big backlit LCD (212X64), USB, SD Card
Audio speech outputs (values, alarms, settings, etc.)
Smart Port
Smart Port (S. Port) is a signal wire lull duplex digital transmission interface developed by FrSky
Electronic Co. Ltd. All products enabled with Smart Port (including XJT module. X8R receiver. new
hub-less sensors. new Smart Dashboard. etc). serial port user data and other user inputfoutput
devices can be connected without limitations for numbers or sequences at a high transmission
speed.
Receiver Match
Receiver Match otters that each transmitter program for a particular flight model is bound to one and only one
receiver, which prevents a user from flying his model while the transmitter is still programmed for it.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: FrSky officially X9D announcement
Taranis the god of thunder!
As long as its not the god of gravity and fire.
SM
Sent from my iPod touch using Tapatalk.
As long as its not the god of gravity and fire.
SM
Sent from my iPod touch using Tapatalk.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: FrSky officially X9D announcement
Opening sound should be a thunder clap.ShowMaster wrote:Taranis the god of thunder!
As long as its not the god of gravity and fire.
SM
Sent from my iPod touch using Tapatalk.
- Scott Page
- Posts: 864
- Joined: Wed Dec 28, 2011 3:32 am
- Country: United States
- Location: Tri-Cities, Washington State
Re: FrSky officially X9D announcement
The hex cap screws are a nice touch -- but does that close up of the gimbal give anybody else reason for concern. Anybody handled one that can say how it feels?
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: FrSky officially X9D announcement
The gimbals in the final release are going to be ball raced super duper quality ones.
Sent from my GT-I9300 using Tapatalk 2
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
Re: FrSky officially X9D announcement
YES! ... and the upcomming X12Ds will called Horus - the king of gods!ShowMaster wrote:Taranis the god of thunder!
As long as its not the god of gravity and fire.
SM
Sent from my iPod touch using Tapatalk.
I am shure - these transmitters will rock the scene!
Best regards,
Michael
Re: FrSky officially X9D announcement
I'm waiting for Horus. Don't want just a mere God. I want the king of them
Plus it has 2 screens, a rotary encoder, and the prototype looks really good..
João
Plus it has 2 screens, a rotary encoder, and the prototype looks really good..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: FrSky officially X9D announcement
May have to wait some time longer.
The x9d has been majorly upgraded from its original plans for launch. (that's why there has been a delay)
I think the x12d could be at least a year or more off
Sent from my GT-I9300 using Tapatalk 2
The x9d has been majorly upgraded from its original plans for launch. (that's why there has been a delay)
I think the x12d could be at least a year or more off
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
Re: FrSky officially X9D announcement
Hi Scott,Scott Page wrote:The hex cap screws are a nice touch -- but does that close up of the gimbal give anybody else reason for concern. Anybody handled one that can say how it feels?
I use a Graupner/JR MX22 and I am pretty shure that with hands on I 'feel at home' along with the Taranis (another part is the more flexible but complex FW ).
I also own a Turnigy 9XR but this transmitter is NOT so handy (some switches are badly reachable!)
Best regards,
Michael
Re: FrSky officially X9D announcement
It doesn't matter. I'm sure it's worth the wait..Rob Thomson wrote:
I think the x12d could be at least a year or more off
Also if it's still about an year away, I can reduce my daily savings from 1 Euro a day, to 50 cents a day
Until then I will just enjoy my 9x's.. I invested too much time in them to put them on a shelf right know. Want to fly the hell out of these two now.
When I get the "Horus" radio, at least one of the 9x (if I don't use it) will go in a glass container and to a special place in the living room.
I think the 9x found it's place in history, thanks to some amazing comunity.. ours!!
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: FrSky officially X9D announcement
Sounds good to me... I wonder if they might fit our 9x's? ... If that is the case, then we could buy the X9D and rip out the gimbals from them to use on our real transmitters.Rob Thomson wrote:The gimbals in the final release are going to be ball raced super duper quality ones.
Re: FrSky officially X9D announcement
+1
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: FrSky officially X9D announcement
They didn't say they would not send spare partsFlaps 30 wrote:Sounds good to me... I wonder if they might fit our 9x's? ... If that is the case, then we could buy the X9D and rip out the gimbals from them to use on our real transmitters.Rob Thomson wrote:The gimbals in the final release are going to be ball raced super duper quality ones.
Re: FrSky officially X9D announcement
The Standard Kit: $175
Taranis Transmitter
Aluminum Travel Case
Battery
Charger Adapter
Neck Strap
The Combo Kit: $199
Taranis Transmitter
Aluminum Travel Case
X8R - 8/16 channel Full Duplex Telemetry Receiver
Battery
Charger Adapter
Neck Strap
As announced in http://www.rcgroups.com/forums/showpost ... tcount=111.
Taranis Transmitter
Aluminum Travel Case
Battery
Charger Adapter
Neck Strap
The Combo Kit: $199
Taranis Transmitter
Aluminum Travel Case
X8R - 8/16 channel Full Duplex Telemetry Receiver
Battery
Charger Adapter
Neck Strap
As announced in http://www.rcgroups.com/forums/showpost ... tcount=111.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: FrSky officially X9D announcement
Aha! I am happy!
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
Re: FrSky officially X9D announcement
Does anyone know, if there is a dummy into the module slot at delivery or is the module slot 'naked'?
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: FrSky officially X9D announcement
No idea.
For me... The logical thing is to install an orange rx.
That way I can fly the few dsm planes I have in it.
I suspect that I will install an internal antenna mod for this
Sent from my GT-I9300 using Tapatalk 2
For me... The logical thing is to install an orange rx.
That way I can fly the few dsm planes I have in it.
I suspect that I will install an internal antenna mod for this
Sent from my GT-I9300 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
Re: FrSky officially X9D announcement
Hm, the module slot MAY carry a second HF-transmitter-module. The Taranis has already an internal FrSky HF-transmitter part built in. For me it may be 'oversized' to bring the antenna of the SECOND HF-module into the transmitter
So for the first start or anyone who has no needs for a second module it would be fine if the module slot will be NOT 'naked' - it would be a kindly thing if FrSky puts a dummy into the slot.
So for the first start or anyone who has no needs for a second module it would be fine if the module slot will be NOT 'naked' - it would be a kindly thing if FrSky puts a dummy into the slot.
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
Re: FrSky officially X9D announcement
Yep, that's it
Thank you Kilrah ...
Thank you Kilrah ...
Re: FrSky officially X9D announcement
Looking good.. Is the travel case of good quality? Are they going to sell the gimbal assembly as a seperate item?
I wonder what hacks/modifications people will want or do.. Head tracker input? Another joystick unit? Push button switch on the joystick(s)?
The list goes on.. Will I buy one... Probably not as I have invested a lot of time and effort into the 9x.. If I was starting out before I bought into the 9X.. I would have jumped at this.
Must say that I love my Spektrum DX6i with the scroll wheel.. Programming is so fast with that. Frsky have missed a trick there..
I wonder what hacks/modifications people will want or do.. Head tracker input? Another joystick unit? Push button switch on the joystick(s)?
The list goes on.. Will I buy one... Probably not as I have invested a lot of time and effort into the 9x.. If I was starting out before I bought into the 9X.. I would have jumped at this.
Must say that I love my Spektrum DX6i with the scroll wheel.. Programming is so fast with that. Frsky have missed a trick there..
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: FrSky officially X9D announcement
I did specifically ask if the gimbals will be available as spare parts, the answer was YES.
I had a problem with one of the pots on the prototype unit (not the type that will be in the production unit). I've fitted a gimbal from a 9x (thanks Rob), fits without any problem.
I'm getting to like the stick scrolling I added to er9x/ersky9x. It is quite quick to use. I'm looking to see if it can be added to openTX for the Taranis, but I'm not as familiar with the menu code of openTX for the Taranis, it doesn't have left/right keys!
Mike.
I had a problem with one of the pots on the prototype unit (not the type that will be in the production unit). I've fitted a gimbal from a 9x (thanks Rob), fits without any problem.
I'm getting to like the stick scrolling I added to er9x/ersky9x. It is quite quick to use. I'm looking to see if it can be added to openTX for the Taranis, but I'm not as familiar with the menu code of openTX for the Taranis, it doesn't have left/right keys!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: FrSky officially X9D announcement
If you wait for the next one "HORUS" it might have all that, and maybe be a tray radioFlaps 30 wrote:Will I buy one... Probably not as I have invested a lot of time and effort into the 9x.. If I was starting out before I bought into the 9X.. I would have jumped at this.
Must say that I love my Spektrum DX6i with the scroll wheel.. Programming is so fast with that. Frsky have missed a trick there..
I'm waiting for it too. The first radio I had (and still have) here in Germany was a Graupner mc-16 tray radio and I was flying using my thumbs
I'm already training to fly tray radio on the sim.. when frsky releases it I'll be ok with it..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: FrSky officially X9D announcement
Yes.. The tray format is the best thing around. You can have a whole bunch of switches and sliders on it with a comfortable layout. As for thumbs flying.. That is frowned upon and (imo) doesn't give you precise control. So it is a good idea to make use of the top of the sticks to place a switch on them. It's a shame that it seems to be a European thing. I suppose that (stiring pot warning) America is to blame for the toy layouts we have now. Kraft and other companies like them are partly to blame. The Japanese followed that up and hooked America and the UK..
My best radio was a tray one. It was made by Simprop it was the SAM system which had plug in modules. So you could have a number of them set up as you wanted. No messing around with menus on small screens. It was all in front of you and you could see at a glance all the settings.
Shouldn't hijack this thread as this is all about the X9D and not about tray format vs toy format TX's
I await to see the price of the new kit when it gets to the UK.. Along with the availability of it and the gimbal assembly + pots. I have a sneaking feeling that the price in UK pounds will be close to the dollar price from UK sellers.
My best radio was a tray one. It was made by Simprop it was the SAM system which had plug in modules. So you could have a number of them set up as you wanted. No messing around with menus on small screens. It was all in front of you and you could see at a glance all the settings.
Shouldn't hijack this thread as this is all about the X9D and not about tray format vs toy format TX's
I await to see the price of the new kit when it gets to the UK.. Along with the availability of it and the gimbal assembly + pots. I have a sneaking feeling that the price in UK pounds will be close to the dollar price from UK sellers.
-
- Posts: 8
- Joined: Sat Jan 12, 2013 9:52 pm
- Country: -
- Location: Wunstorf - near Hannover. Lower Saxony
Re: FrSky officially X9D announcement
The solution for you could be 'PotScroll' - it's available in er9x and openTXFlaps 30 wrote:Must say that I love my Spektrum DX6i with the scroll wheel.. Programming is so fast with that. Frsky have missed a trick there..
Re: FrSky officially X9D announcement
Stickscroll is available in er9x. That could be way better than potscroll..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: FrSky officially X9D announcement
Right. I will try to add the stickscroll to openTx this week. Could be available for all boards.