![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
It 'was' annoying to me when 1st used er9x that pot scrolling thing. Ever since it has been turned off on mine.
It is a fantastic idea, or so says the engineering part of my brain. Maybe it could be implemented as a compile time build option rather than a default feature?I'm thinking of trying to add a small number of 'free' scaling functions, just don't know when I'll get time to do it though.
We are very excited!MikeB wrote:Perhaps I'll include some 'pre-defined' scalings as well as free ones, e.g. deg C to deg F, metres to feet.
Is it too complicated to get users to select one of these, as opposed to just a global 'METRIC' or 'IMPERIAL' option. You get to choose which items are converted.
I should have a new revision of er9x out this weekend, changes:
Added some code towards a vario.
Added some code to support FrSkys new vario device (not yet commercially available).
Allow more blades (1-50) for the RPM scaling.
Increase the voice queue size from 10 to 16.
Add 'minus' to voice output.
Allow GVARS as voice inputs.
Add the !CV1 option for curves (from O9X).
Various flash savings (some from O9X).
Calibration procedure does not need the centre position for pots.
Allow selection of the first channel in the PPM output.
The last item lets you use low numbered channels as 'virtual' channels, then output the real channels. This means the 'virtual' channels mare calculated before the actual output channels, reducing latency.
Overall, the flash size is smaller than the last release!
Mike.
Don't forget to bear in mind the voice aspects when reading out values. They also have to reflect what is being displayed.MikeB wrote:Perhaps I'll include some 'pre-defined' scalings as well as free ones, e.g. deg C to deg F, metres to feet.
Is it too complicated to get users to select one of these, as opposed to just a global 'METRIC' or 'IMPERIAL' option. You get to choose which items are converted..
Umm... Think about that for a moment. The answer is in your question.jhsa wrote:If the pots no longer need the center position to calibrate, How will the joystick calibrate the centre?