Smartieparts Board and Mac; Need Help!
Smartieparts Board and Mac; Need Help!
Hey guys,
I have a problem getting the smartieparts board run on my mac. When I plug the board in and have a look at the system log it says:
Dec 20 14:44:25 localhost kernel[0]: USBF: 79636.586 [0xffffff8013e92200] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0x4000000)
Dec 20 14:44:28 localhost kernel[0]: USBF: 79639.596 [0xffffff8013e92200] The IOUSBFamily was not able to enumerate a device.
Dec 20 14:46:18 localhost kernel[0]: USBF: 79749.635 [0xffffff800eba9200] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0x6000000)
Dec 20 14:46:21 localhost kernel[0]: USBF: 79752.649 [0xffffff800eba9200] The IOUSBFamily was not able to enumerate a device.
Can anyone help me please???
Thanks!
Oh btw I´m a "average mac user" so I´m no pro with programming n stuff. I run mac os 10.8.2
And sorry for my poor english!
I have a problem getting the smartieparts board run on my mac. When I plug the board in and have a look at the system log it says:
Dec 20 14:44:25 localhost kernel[0]: USBF: 79636.586 [0xffffff8013e92200] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 1 of Hub at 0x4000000)
Dec 20 14:44:28 localhost kernel[0]: USBF: 79639.596 [0xffffff8013e92200] The IOUSBFamily was not able to enumerate a device.
Dec 20 14:46:18 localhost kernel[0]: USBF: 79749.635 [0xffffff800eba9200] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of Hub at 0x6000000)
Dec 20 14:46:21 localhost kernel[0]: USBF: 79752.649 [0xffffff800eba9200] The IOUSBFamily was not able to enumerate a device.
Can anyone help me please???
Thanks!
Oh btw I´m a "average mac user" so I´m no pro with programming n stuff. I run mac os 10.8.2
And sorry for my poor english!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: Smartieparts Board and Mac; Need Help!
Does it works under windows ?
It should enumerate correctly....
It should enumerate correctly....
Re: Smartieparts Board and Mac; Need Help!
Will try that tomorrow!
Re: Smartieparts Board and Mac; Need Help!
'Same problem with windows!
Re: Smartieparts Board and Mac; Need Help!
Try changing your USB cable, and checking the USB header is properly connected to the SP board.
Re: Smartieparts Board and Mac; Need Help!
Still not working! Maybe the board is faulty?
Re: Smartieparts Board and Mac; Need Help!
Yeah, could be... Check with the seller, he might have extra troubleshooting steps to give you!
Re: Smartieparts Board and Mac; Need Help!
Allright, thanks meanwhile!
Re: Smartieparts Board and Mac; Need Help!
Have you got the radio turned on? The latest versions don't draw power from the usb.
Sent from my GT-I9300 using Tapatalk 2
Sent from my GT-I9300 using Tapatalk 2
Re: Smartieparts Board and Mac; Need Help!
Actually no. I tried to flash with the backside disconnected. I ordered the 9x and the board in spring. The board is, I think rev 2.2.
Thanks
Thanks
Re: Smartieparts Board and Mac; Need Help!
Hi guys,
I contacted Steve from Smartieparts and we figured out that one of the wires that go to the usb header was switched, I corrected that. Now I tried to flash the TX with epee. Now I get the following message:
avrdude initialized and ready to follow instructions
reading ######### 100% 0.0s
avrdude: device signature= 0x000000
avrdude: Yikes! invalid device signature
double check connections and try again or use -F to override this check
Steve told me to ask here since he is only able to give hardware support.
What´s the problem?
Thanks
I contacted Steve from Smartieparts and we figured out that one of the wires that go to the usb header was switched, I corrected that. Now I tried to flash the TX with epee. Now I get the following message:
avrdude initialized and ready to follow instructions
reading ######### 100% 0.0s
avrdude: device signature= 0x000000
avrdude: Yikes! invalid device signature
double check connections and try again or use -F to override this check
Steve told me to ask here since he is only able to give hardware support.
What´s the problem?
Thanks
Re: Smartieparts Board and Mac; Need Help!
Hardware problem
Usually either you did not power up the radio, or you have a bad connection between the programmer board and the radio mainboard pads.
Usually either you did not power up the radio, or you have a bad connection between the programmer board and the radio mainboard pads.
Re: Smartieparts Board and Mac; Need Help!
By powering up you mean switching the tx on with battery and the backside case connected?
Re: Smartieparts Board and Mac; Need Help!
Yes! The latest SP board version needs the radio to be powered.
Re: Smartieparts Board and Mac; Need Help!
It works, thank you very much!
Re: Smartieparts Board and Mac; Need Help!
Hi Koarl,
I have the same problem, which wires should I switch?
I have the same problem, which wires should I switch?
Re: Smartieparts Board and Mac; Need Help!
Write me a message with your emailaddy per pn and I will forward you the mails I got from Steve Morehouse. I'm a bit busy at the moment so it can happen that I forget about you. If so please remind by a message.
Re: Smartieparts Board and Mac; Need Help!
Hi,Koarl wrote:Write me a message with your emailaddy per pn and I will forward you the mails I got from Steve Morehouse. I'm a bit busy at the moment so it can happen that I forget about you. If so please remind by a message.
I've contacted Steve who asked me connector photos. My problem isn't cables of the connector.
Steve is trying to solve my problem.
Thank you.
Re: Smartieparts Board and Mac; Need Help!
Allright. But if you need any advice, dont hesitate to ask.