er9x development
Re: er9x development
Xtm: The trims for the 4 channels
REN: Rotary encoder
REN: Rotary encoder
Re: er9x development
Thanks!!!Kilrah wrote:Xtm: The trims for the 4 channels
REN: Rotary encoder
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: er9x development
I do not understand!
Why are not available everywhere in the Global Variables (eg: Safety Switch, Custom Switches)?
Why are not available everywhere in the Global Variables (eg: Safety Switch, Custom Switches)?
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: er9x development
Time! Every item that could be a GVAR needs the menu editing code changed to allow A GVAR to be selected, and then every use of it to be changed to check for a normal value or a GVAR value. I have too many other things I'm looking at as well so I have only partly got GVARS working. Also, they used up quite a bit of flash, so I'm also trying to save some more flash as well.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: er9x development
Understand!!! Thanks Mike!MikeB wrote:Time! Every item that could be a GVAR needs the menu editing code changed to allow A GVAR to be selected, and then every use of it to be changed to check for a normal value or a GVAR value. I have too many other things I'm looking at as well so I have only partly got GVARS working. Also, they used up quite a bit of flash, so I'm also trying to save some more flash as well.
Mike.
It's not so much the absolute need.
I think the write ability of MegaSound Module to SD is more interesting!
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: er9x development
Amen to that, brother...
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: er9x development
'MegaSound Module", what is that?
Re: er9x development
The latest developments of the homemade sound module for stock board: viewtopic.php?f=5&t=948&start=2490
Re: er9x development
Gee, I have been reading that thread, but don't recall any where it mentioned 'MegaSound board'. Is that the version Mike's working on or Oliver's working on, or hega's working on,..............?
I must have missed something.
I must have missed something.
Re: er9x development
It's the first time I heard that name too, but it was pretty easy to understand what it related to... I don't think it really has an official name yet anyway.
Re: er9x development
"Megasound" or "MegaVoice" I think this is the correct name. Need to distinguish between the two as it is of the "first" on the module WTV020-SD and the "second" on the microcontroller Atmega328
Re: er9x development
Ah, THAT '(At) Mega Mess' module.
ps: this is in absolutely joking sense, not criticizing in any way.
ps: this is in absolutely joking sense, not criticizing in any way.
Absolutely, data logging, ultimately write model setting to SD and retrieve model setting from SD for all 9X variants.I think the write ability of MegaSound Module to SD is more interesting!
Re: er9x development
Hey, You know what?? I like the name..
MegaSound9X
What do you guys think?? Oliver, I guess we have a killer name for it..
MegaSound9X
What do you guys think?? Oliver, I guess we have a killer name for it..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: er9x development
hi everyone. i'm new to er9x and not that adept with electronics. i installed er9x ver780 on my turnigy. i'm using a FrSky DJT module and Frsky D8R II plus receivers, FLD02, sensor hub. i had them before changing to er9x. question is can i change the owner name with ver780? i tried to but i can't seem to change it using the transmitter only. can anyone help with an instruction? not sure if this is the forum to post this but this is where i saw r780 being posted. thanks in advance
Re: er9x development
GOOD!jhsa wrote:Hey, You know what?? I like the name..
MegaSound9X
What do you guys think?? Oliver, I guess we have a killer name for it..
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!
Re: er9x development
Good, now we know 'exactly' what we are talking about. and what is that again?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: er9x development
I'll have a look, I may have caused a problem with that editing, it is very specific code. I've been changing things to allow for a rotary encoder.voltzmd wrote: question is can i change the owner name with ver780? i tried to but i can't seem to change it using the transmitter only. can anyone help with an instruction?
You should be able to change the name using eepe.
Mike.
Edit, OK, will be fixed in next revision. Currently, editing mode for the owner name may be entered using the rotary encoder button only!
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: er9x development
thank you for the quick reply mike. how do i do that? sorry i'm not electronically inclined. got into er9x by watching videos and reading how too's. can you point the way on how to do it?MikeB wrote:I'll have a look, I may have caused a problem with that editing, it is very specific code. I've been changing things to allow for a rotary encoder.voltzmd wrote: question is can i change the owner name with ver780? i tried to but i can't seem to change it using the transmitter only. can anyone help with an instruction?
You should be able to change the name using eepe.
Mike.
Edit, OK, will be fixed in next revision. Currently, editing mode for the owner name may be entered using the rotary encoder button only!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: er9x development
You need to do the rotary encoder mod to have a rotary encoder. Have a look at viewtopic.php?f=5&t=1525&hilit=rotary+encoder.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: er9x development
Dear Developers,
I would like to know yours opinion about replacement stick's pots to rotary encoders. Does it have a sense? It's possible?
Thks
I would like to know yours opinion about replacement stick's pots to rotary encoders. Does it have a sense? It's possible?
Thks
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: er9x development
I don't think you will get a rotary encoder that will provide anything like enough resolution, and you would also need a method to locate the stick centre position.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: er9x development
You can change with magnetic encoders like AMS ones that are able to provide both digital and analog (programmable range) output, but there is no 1:1 mechanical replacement so a lot of work should be done at home.
Re: er9x development
I mean something like this one http://www.avagotech.com/pages/en/motio ... -6600-t16/ . Promised resolution of 0.00549º, not bad, eh?
Or http://www.ams.com/eng/Products/Magneti ... rs/AS5048A grazie Romolo
Or http://www.ams.com/eng/Products/Magneti ... rs/AS5048A grazie Romolo
Re: er9x development
maybe I am missing something here, but I cant see how to use the GVARs. I can scroll through all the GVAR variables, but they dont allow you to set anything, they just mirror whatever that input is doing.
EX: If I set it to AIL, then I can see the value that the AIL channel is sending while I move the stick.
how does this help me make a set variable that can be used globally? if I want to set a value of gv1 = 80%, as an example.
EX: If I set it to AIL, then I can see the value that the AIL channel is sending while I move the stick.
how does this help me make a set variable that can be used globally? if I want to set a value of gv1 = 80%, as an example.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: er9x development
How many people actually use POT SCROLLING?
The three pots are available for moving left-right, up-down, and adjusting values, but are they used much?
With the addition of a rotary encoder in particular, I feel they are using up valuable flash memory that could be put to better use.
I am proposing to REMOVE POT SCROLLING, at least from the FRSKY version of the code, which is the one most in need of extra space.
With the possibility of adding a rotary encoder by direct wiring, or by fitting a TelemetrEZ board when that is tested to provide the connections, POT SCROLLING is not required.
I hope to be testing using a rotary encoder connected to the TelemetrEZ board soon.
Mike.
The three pots are available for moving left-right, up-down, and adjusting values, but are they used much?
With the addition of a rotary encoder in particular, I feel they are using up valuable flash memory that could be put to better use.
I am proposing to REMOVE POT SCROLLING, at least from the FRSKY version of the code, which is the one most in need of extra space.
With the possibility of adding a rotary encoder by direct wiring, or by fitting a TelemetrEZ board when that is tested to provide the connections, POT SCROLLING is not required.
I hope to be testing using a rotary encoder connected to the TelemetrEZ board soon.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: er9x development
Minbari: If you set the GVAR input to ----, then you can set the value to a constant e.g. 80% in you example.
I'm still working on the full implementation of GVARS, there are currently limited places where they may be used. EXPO, Dual rates and mixer weight and offset are currently implemented.
In addition, a GVAR may be used as the source of a mixer.
Mike.
I'm still working on the full implementation of GVARS, there are currently limited places where they may be used. EXPO, Dual rates and mixer weight and offset are currently implemented.
In addition, a GVAR may be used as the source of a mixer.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: er9x development
thanks, I didnt even think to try to set a static variable with the --- showing, lol.
Re: er9x development
As far as I'm concerned go ahead I'm installing the rotary encoder in both my radios.. I wonder if many people use it anyway.. I know that many complained about itMikeB wrote:
I am proposing to REMOVE POT SCROLLING, at least from the FRSKY version of the code, which is the one most in need of extra space.
I do feel a bit sad as pot scrolling was one of the few ideas I had that was implemented..
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: er9x development
I tried pot scrolling for a while then reverted back to normal, as I found it a little clumsy to use. My vote would be to remove it.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: er9x development
Not that I use er9x, but I never use it. Just gets on the way
Sent from my Nexus 7 using Tapatalk 2
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!